You would need FRP (Fiberglass Reinforced Panel) adhesive. Use a grooved trowel and put the adhesive on the wall. Then apply the panel to the wall. You can use a piece of 2X4 and go over the panel to adhere it. Do not use any other adhesive as it may not hold and affect the panel.
I am turning my wood shed into a space to hang out in year round. I’ve just finished insulating The joist spaces and I’m wondering if I need to put up drywall bef...
See more
I am about to patch up this water damage on a low bathroom ceiling. What can i paint/seal the entire ceiling with to minimize future water damage? the ceiling is very...
See more
I had to look up what this meant. FRP is Feberglass Reinfornced Plastic. This link will give you some ideas on what to do.
http://homeguides.sfgate.com/install-frp-panels-drywall-48157.html
You would need FRP (Fiberglass Reinforced Panel) adhesive. Use a grooved trowel and put the adhesive on the wall. Then apply the panel to the wall. You can use a piece of 2X4 and go over the panel to adhere it. Do not use any other adhesive as it may not hold and affect the panel.
No worries. I like learning new things!!