How to fix bricks where the concrete between have loosened?

Question

Suzette · Answer

Hi Gail, Here's a how to video! https://www.youtube.com/watch?annotation_id=annotation_1416296339&feature=iv&src_vid=nL5w17iq-Iw&v=jkOJ44cOiAM

Hope this helps!

Ginny · Answer

It's called 'pointing.' I would watch the video, and if it looks complicated call in a pro.

Sue Lilly · Answer

I would never have thought of this, cheers

Texas Mom · Answer

My dads bricks on his house was like that. I mixed a small amount of cement and put liquid nails in the mix until it was thick enough to apply. I was careful not to add too much liquid nails at a time because it would make the mix too watery. I applied it where the cracks were. That was six years ago. And its still holding strong.

861650 · Answer

A good video and I watched it twice then I thought, could you use a squirt bottle? And, if you don't have a steady hand use painter's tape to get a perfect seam...I do this when caulking...hmmmmm

Gail Trice · Answer

Thanks for all the great ideas. This is wonderful!

Linda · Answer

Helpful ideas. Will add liquid nail to cement and will also use a squirt bottle! Thanks for the additional ideas readers! :)

Nancy Eaton McEwen · Answer

I will have to share this with my parents. Great ideas.

How to fix bricks where the concrete between have loosened?

Suggested Project Book

15 Uncanny Hacks For Making Pretty Garland Decor

How to fix bricks where the concrete between have loosened?

Suggested Project Book

Related Discussions