How can you restore a white fiberglass tub/shower?
by
Benn
+2
We have some rust in our water and can usually remove that, but it has came to point where has kind of a dengy white look. Didn't know if there is some kind of cleaner wax that would help or what.
Related Discussions
Suggested Project Book
Hi Benn, Here's a link that may help: https://removeandreplace.com/2014/12/18/how-to-make-your-old-fiberglass-bathtub-or-shower-look-new/
Good luck!
Easy Off No Fume Oven Cleaner in the BLUE can. Spray it on and let it sit till it liquefies. Rinse well. works on enamel, porcelain, and fiberglass.
We've used some gel stuff (made for fiberglass boats)called MSM or MSR - get it at Academy Sporting Goods store - it's in about a 4"-5" diameter plastic container with a screw-type lid - kinda looks like icy-hot or mineral ice. Wipe it on, let sit a bit and wipe off. We had a white fiberglass boat and the lake water would stain the hull horribly; this stuff did the trick.
For a non toxic fix tryvinegar and baking soda. The mixture will foam and bubble then just wipe off. If any residual try hydrogen peroxid using above technique.