How to fill a large gap in a plywood to leg joint (coffee table)?
by Marcos
plywood shelf under a coffee table
2 answers
-
![Johnavallance82]()
Johnavallance82
on Apr 27, 2018
I think I would use a timber trim and Mitre the corners ......... -
![Gary B]()
Gary B
on Apr 27, 2018
If you still had the plug that you cut out of it you could cut a piece of it but if you don't, I would use a wood wedge, drive it down till it's tight and cut it off with a chisel- See 1 previous
Sign Up to Answer
