How can I repair peeling coating on my IKEA Abstrakt cabinet's doors?
I have an old Ikea Kitchen but because Ikea changed the cabinet sizes in 2015 I cannot buy new doors. I have the high gloss Abstrakt doors. However they are peeling - well the clear glossy plastic is come off of a white semi gloss mdf? or something. However, it looks like you can pull off the supergloss clear thermafoil and use the doors that way? Is there any way to get a new supergloss finish ie painting or epoxy resin over it? Is there something not too expensive?
Related Discussions
How to get rid of mice?
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
How do I fix squeaky hardwood floors?
How can I remove these water marks from wood tables?
My husband bought these tables and a few of them are in good condition while some have like water marks on them (not sure though). I would like to know what could I ... See more
Cat scratch pulls on a couch
I have an ivory, jacqaurd fabric couch. I recently rescued two young cats and one has claws. I came home one day to find she scratched the front of the arms. They had... See more
All you can do is remove the Thermofoil and paint.
https://www.hometalk.com/diy/kitchen-dining/kitchen-dining-furniture/redoing-my-kitchen-peeling-cabinets-one-at-a-time-28925627
Redoing My Kitchen Peeling Cabinets One at a Time
Will Ikea not replace them?
Rustoleum 2X, and it comes in gorgeous spray and brush colors. Made for plastic and many other materials. You could “redecorate “ the whole kitchen by just redoing the doors of the kitchen cabinets. Jewell
Thanks everyone. At this point I was able to glue down the peeling thermafoil and hid e the damage with a stainless steel strip that I attached with E6000. Done for now. I think if it gets worse after a few years I can remove the thermafiole or plastic coat and just use the doors with a semi gloss finish (that's what happens when you remove the glear plastic coating. And then I hopefully can replace everything.