How can I use my leftover floor tile to make a round table top?
![Treena Millett](https://cdn-fastly.hometalk.com/media/profile/2018/05/13/33412208_1.jpg?size=91x91)
Related Discussions
How can I tile a veneer surface?
![Littlemiss](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-L-1ABB71.png?size=50x50)
I have a bookcase that has a veneer finish. I want it in my kitchen so intend to paint it but I want to tile the top with mosaic tiles. How can I ensure the grout wi... See more
I want to fill in the door knob hole in a solid wood door!
![Shirley R](https://cdn-fastly.hometalk.com/media/profile/2021/08/22/37765_1.jpg?size=50x50)
What can I use to fill in the door knob hole in a solid wood door? I want to sand it afterwards as though the hole did not exist! Thanks ShirleyBest Wood filler!Need ... See more
How do you remove Sharpie ink from a butcher block table top ?
![Jim Chandonia](https://cdn-fastly.hometalk.com/media/profile/2016/08/23/10597289_1.jpg?size=50x50)
The kids did a number to our 48 in. diameter butcher block kitchen table with a black Sharpie permanent marker. We have replaced the table, but I would like to reuse... See more
How to get air bubbles out of contact paper?
![Julie](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-J-1ABB71.png?size=50x50)
I covered my kitchen table with contact paper-how do I get rid of air bubbles?
How to remove drops of epoxy from sheet vinyl floor without damage?
![Marti](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-M-FF00A7.png?size=50x50)
How to fix condensation running down the walls in a master bedroom??
![Cm525248511](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-C-BC70FF.png?size=50x50)
There is also small black spots appearing on the ceiling of the bedroom?
I notice some very very tiny ants on my kitchen sink & can't get rid!
![Shi29804184](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-S-BC70FF.png?size=50x50)
Start with a round table top. Attach the tile with silicone caulk and use the same caulk with grout. best of luck making the curved cuts.
https://www.familyhandyman.com/tiling/how-to-make-precision-cuts-with-a-diamond-tile-saw/view-all/
You can use the tiles as they are or you can break them up to make a mosaic. You could also use as many whole tiles as you can (because its a round table) and then break some up and fill in mosaic around the square tiles to make the circle.
Cut a circle, the size you want, from plywood and then cover with cement/concrete board used for tile....cut the cement board to match the plywood circle... apply the tile to the table top, if using square tiles and not mosaic pieces... leave whole... use a grinder with a cutting disc to cut the circle..for best results cut with the tile resting on the ground... such as a garage floor or driveway...... WEAR eye protection, gloves and long pants and sleeves....NO shorts and no flip flops.... SAFETY FIRST.... AND if you do not know how to use a grinder... find some one who DOES....