F2 Error on GE appliance
I am freaking out now since I need the oven so bad for tomorrow!!!
Can this be fixed or does it need a pro?
-
Woodbridge Environmental Tiptophouse.com on Jan 18, 2012You need a pro on this Yamini, This is an error code that comes from the temp sensor located in the back of the oven that connects to the circuit board. It indicates that the oven is overheating. The unit needs to be pulled out from the wall to access this device. Then an Ohm meter is used to check. If the range of the ohms is correct then they replace the circuit board located in the front near the display. If the reading is off from what I understand the device that send the reading to the circuit board needs to be replaced. You could unplug the oven for a short while then plug it back in to see if it resets and is only a one time thing. But I would plan on having this fixed as normally even if it corrects itself this time, it may fail again the next time you use it.Helpful Reply
-
-
Yamini LEED AP at Urbanmotifs on Jan 18, 2012Ok the Pro is here, thanks Woodbridge! i called my Home warranty and they sent somebody, now I am not sure if this can be fixed today. But I am hoping they will.Helpful Reply
-
-
Miriam Illions on Jan 18, 2012Don't freak out, I'm sure your guests will understand :)Helpful Reply
-
-
Yamini LEED AP at Urbanmotifs on Jan 18, 2012Thanks Miriam, the oven is behaving now!!Helpful Reply
-
Related Discussions
I had soaked my gas stove top in bleach overnight.it has turned black
please advise on how to cleanThank you
Why are ants coming from under my toilet & around the toilet base?
There are these black ants coming from under my toilet and I don't know why. Food sources? Stagnant water? Bathroom flooring issues? I find these tiny ants in the toi... See more
Which room would you pick for a room makeover in your home?
We're curious, if you could redesign any room in your home, which is the room you would choose?Whether it's your cozy living room, your bustling kitchen, or even your... See more
Can I use a small power sander to remove paint from my porch?
Have painted it with outdoor Behr deck paint but it has flaked up. I got a lot of it up but need to get the rest off before repainting. Getting too old to get down ... See more