we want to convert from wood to gas fireplace. gas is there, need logs. vented or ventless and can we install ourself?
-
Dan's of Central Florida, Inc. on Feb 16, 2012Hi Sandy, When it comes to gas I highly recommend calling in a professional plumber that works with gas due to the potential for explosions, leaks, etc. Gas is something you don't want to make any mistakes with.Helpful Reply
-
-
Sandy T on Feb 16, 2012thanks!Helpful Reply
-
-
3po3 on Feb 16, 2012I second Dan's motion. It's too dangerous to mess with if you're not a pro.Helpful Reply
-
-
Woodbridge Environmental Tiptophouse.com on Feb 16, 2012Sandy as Dan said and Steve seconded. the gas pipe part can be difficult if not done right and down right dangerous as well. But there is even more to think about when tapping into a gas line. Many people are doing this type of project on their own and doing it quite successfully or so they thought. When gas pipe is installed in a home the building contractor uses the smallest pipe size they can to do the job. When someone comes along and taps into the pipe system to install a fireplace, or BBQ grill they do not realize that they are causing the gas supply to be undersized if several appliances are running at the same time. Much like an extension cord that must be larger the longer the run or because of a bigger current draw; so must the main gas line servicing the new appliance being connected. We see this issue all the time when we go to a home that has a high efficiency hot water heater installed. The complaint is often that they are running out of hot water, yet never had that issue before. Once we size the pipes for the new BBQ addition we often find that the pipe is not big enough to properly deliver enough fuel to properly operate everything at the same time. Plus you need to check the size of the gas meter as well. They are sized by the gas company based on current demand. When a larger demand is applied to them, they can start reading wrong which can end up costing you more on your energy bill. The last thing is the flue pipe. With the higher efficiency systems, and depending upon what you purchase, you may need to line your flue to a smaller size so you get the proper drafting needed.Helpful Reply
-
-
Denise McLeod on Sep 03, 2015You definitely need a certified gas fitter to ensure that it gets installed according to code and that your insurance carrier will recognize.Helpful Reply
-
Related Discussions
How can I remove labels from coffee cans so I can upcycle them?
How can i keep neighbors small children from climbing my fence?
I have a 20 year old chain link fence set back on my property by almost a foot. The neighbors small children keep climbing it. I have talked to the dad and he doesn't... See more
How to get rid of bugs on raspberry bush without pesticide?
How can i upcycle rigid foam packing blocks?
how can i upcycle rigid foam packing blocks?
How do I get rid of moles, voles and chipmunks?
They dig holes, have tunnels and throw dirt all over. how can I get rid of chipmunks, voles, and moles with natural easy to find ingredients?
How to remove Behr Deckover?
We used Bher Deck over about 5 years ago. It is peeling and fading in places. We have tried to remove it. It is almost impossible. HELP!
What are your thoughts on painted brick: yay or nay?
Painting bricks can completely transform the appearance of a home, giving it a fresh, modern look or adding a pop of color to an otherwise plain facade.On the other h... See more