What's the easiest way to keep your tile grout clean?
Related Discussions
How to clean a mirror without streaks?
Every time I clean my mirrors, they end up having tons of streaks and almost look worse than before I started. What could I use to clean them that won't leave streaks... See more
How to clean burns on stainless steel pans?
Help! I burned my pan. How do I clean stainless steel cookware that's been burned?
How to clean shower doors
How to clean glass shower doors
How to clean hardwood floors in the kitchen?
What is the best way to clean hardwood floors in the kitchen?
How to clean my kitchen cabinets from grease?
My kitchen cabinets are embarrassingly greasy. Please share your degreasing tips with me so I don't have to cringe every time I glance at my cabinets.
What is the easiest way to clean enamel paint off steel window frames
The window putty was also poorly put in. Is there an easy way to remove or repair it?
What is the easiest way to remove wax from tile floors?
I made the mistake of waxing my porcelain tile floors. I have bought a product from Home Depot to remove it but it is slow going. Is there anyway to speed up the proc... See more
I use a daily shower spray and Mr. Clean Magic eraser
Thanks - !
Use a grout sealer first, unless the installer tells you that it's not needed, then clean it every time it's used
Another great product that I use is called Scrubbing Bubbles. The bubbles do the work for you. Apply as needed, but good advice is to keep a cloth handy in the shower to just wipe down the shower walls and door after each use -- keeps mold and mildew at bay!
Hi Michelle, I use a Mr. Clean Magic Eraser made for the bathroom! Just before I get out of the shower, I wipe it down! It works great! It also helps to keep the shower door open for a while to let it dry. :)
Oxi-clean!
Wipe the shower dry after use, leave the door open until completely dry. Clean once a week with Scubbing Bubbles.
Use a cleaner with bleach or a bleach pen for quick touch ups.
After I clean my tile, I spray furniture polish on the tile. It makes the tile look like new and helps protect the grout.
I use toilet bowl cleaner, works very good. One suggestions is to work in small sections. Apply on the grout lines, let set for a few minutes and wipe off. If you can, avoid the blue kind but if not just don't leave it on that long. But it works well.
72 hours after installation is kind of the minimum
Shower at the neighbors ;o)
Our contractor just re-did our shower floor, grouted, sealed and now we have to wait 7 days to use the shower to make sure the sealer is fully set.
Make a paste of baking soda and peroxide then apply it to your grout with a toothbrush. Let it sit a little and then remove with a clean cloth.
https://www.hometalk.com/diy/clean/bathroom/how-to-clean-tile-grout-without-chemicals-7669955
This was one of the easiest ways I found when looking for methods to get my grout clean. I had to cover a lot of places and I didn't wanna spend a lot of times brushing up the grout. This saved me a lot of time and made my tile and grout quite clean. Hope you give it a try.
How to Clean Tile Grout Without Chemicals