Fixing outlet problem-Any ideas to enhance appearance?
Related Discussions
How to get rid of mice?
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
How do I fix squeaky hardwood floors?
How do I kill the power from my main breaker?
I have a home built in 2006, the main panel does not seem to have a main breaker...? See attached pic of the main panel. It's a Siemens G3040 200 amp panel. Outs... See more
Any Ideas for this corner with the wood stove pipe?
I am unclear as to what to do with this part of my house, "The Breakfast Nook".
Purchase PVC electrical box extenders. Easy to install. Always cut power to circuit first.
First turn off power to outlet, then use a box cutter to remove sheet rock over flanges of the outlets. either buy an outlet extender or you can use the spacers sold at big box stores to secure the outlets to the original box. It is SAFER to use a box extender because no exposed wires should come in contact with wood or wallboard of any kind, according to code. You might have to invest in the oversized outlet covers also.
That's a big box store here in the US. I just assumed that you were from the US also. You can get the outlet covers and the box extenders in the electrical section I know for sure at Home Depot. it really isn't that hard to get the outlets out with a box cutter just be careful that you cut in the direction of the opening so that you don't damage the sheetrock that will be outside the cover.
You need to carefully take the outlets out of the box and add a box extension. There are also spacers you could use under the switches with long screws, but a double box extension is the best option. You should not need to take the wiring loose, if you do make a diagram of the wiring as these may be 3 or 4 way switches and correct wire location can vary.