What is best way to stop big drafts at door?
![Linda Partridge](https://cdn-fastly.hometalk.com/media/profile/2021/08/22/352836_1.jpg?size=91x91)
![](https://cdn-fastly.hometalk.com/media/profile/2017/08/16/29180355_1.jpg?size=50x50)
![](https://cdn-fastly.hometalk.com/media/profile/2020/03/21/2408602_1.jpg?size=50x50)
![](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-J-FF00A7.png?size=50x50)
Related Discussions
How to get rid of mice?
![Jessica Hill](https://cdn-fastly.hometalk.com/media/profile/2021/08/22/107358_1.jpg?size=50x50)
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
![Abby](https://cdn-fastly.hometalk.com/media/profile/2021/02/07/50639059_1.jpg?size=50x50)
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
![Sharon](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-S-59A1F4.png?size=50x50)
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
![Frisco's Cards](https://cdn-fastly.hometalk.com/media/profile/2017/01/27/18563525_1.jpg?size=50x50)
How do I fix squeaky hardwood floors?
What is the best way to insulate a double shed door-
![Jaculin](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-J-59A1F4.png?size=50x50)
would a 1/4 or 1/2 inch plexiglass sheet screwed to the door work and give enough insulating numbers to match the rolls of insulation applied to the walls? This shed... See more
What's the best way to obscure view at my semi-transparent front door
![Sonia Soni](https://cdn-fastly.hometalk.com/media/profile/2016/12/15/15978136_1.jpg?size=50x50)
It's a new door so don't want to replace. Its exposed to sun and wind so not sure what wreath would work.
Hi Linda, sounds like your door may need to adjusted! Here's a link that should help with that: http://www.howjunction.com/problem-doors---analysing-what-is-wrong.html
Once your door is square, make sure the seal around the door is in good shape. If not, replace it with door seal. If you have a large gap at the bottom of the door, then you need a door sweep.
Here's a link that may also help: https://www.familyhandyman.com/doors/repair/how-to-stop-door-drafts-around-entry-doors/view-all/
Good luck!
This winter was exceptionally cold in Maine. We have a double layer red velvet curtain hanging at our front door but it does not reach the floor. Because it was so very cold this winter I took a body pillow we had in the attic and wrapped a red curtain around it, making a really big draft dodger. WE have real leakage also at our back door, this mostly down the closing side of the door. We put one metal coat hook on the door frame over the opening and another on the door frame near the doors lock. From these two hooks we hang long and short down coats to cut down on the drafts.
If the door has air space around it and you can see light on the other side it sounds like you need to add weather stripping around the non movable part of the door, put it around the frame.
If under the door, they make or if you are handy, you could custom fit a fabric covered air draft stopper, also a door sweep could help you.
Weather stripping around the outside of door and threshhold.
https://www.simplemost.com/diy-draft-proof-doors-windows-home/
Weatherstripping - I like the kind with the metal strip and rubber gasket, caulk between the outside frame and building siding. If the wall is cold, it could be they didn't insulate the bit between the stud and door frame - remove inside trim and add fiberglass insulation strips or door caulk to fill up the cavity.
https://www.youtube.com/watch?v=YJyc3e_EgL0
https://www.youtube.com/watch?v=0aRx6btsWcI
Add a door threshold gasket..... https://www.youtube.com/watch?v=B8P8oFWeQDs or https://www.youtube.com/watch?v=XrxZeEjSt-Y
Lastly a storm door can also greatly reduce cold from bad weather.
a strip of metal with like a rubber bottom edge. screws on- if door is metal yipes! Would need pro advice there.