Any ideas for antique sewing machine with treadle base?
Related Discussions
How do I replace the base casters of an antique sewing machine?
How can or what can I use as a cost effective replacement for an antique Singer sewing machine base casters. Please help. This is project I am working on using in our... See more
Best way to make your driveway look like stone with paint?
Several years ago there was a DIY video on how to do this but can't fine it.
Which room would you pick for a room makeover in your home?
We're curious, if you could redesign any room in your home, which is the room you would choose?Whether it's your cozy living room, your bustling kitchen, or even your... See more
What are your thoughts on painted brick: yay or nay?
Painting bricks can completely transform the appearance of a home, giving it a fresh, modern look or adding a pop of color to an otherwise plain facade.On the other h... See more
How to remove popcorn ceiling that has been painted?
Does having a paint over a popcorn ceiling change how I'd remove the popcorn ceiling?
How can I get evergreen climbing vines that don't attract bees?
Need privacy screen I can train on trellises for my patio. There's lattice there, but not enough to block out neighboring home. This is a mobile home. Would love flow... See more
I am gluing some colored glass gems onto a glass window..
I am using E6000 to attach the glass gems to an old window. I want to make sure that everything will stay attached. I plan on spraying clear Krylon onto the whole gla... See more
Take the machine out. Close the top shut. Have a piece of glass cut to fit the top. Take off the pedal. Gather post cards and letters from years ago. You can find love letters from soldiers or post cards from soldiers during the war and put them under the glass. Very nostalgic and beautiful. Now you have a desk.
are all the parts in working order? Some models can be converted to electric. Most have only a straight stitch. Which is good for machine stitching a design on a quilt.
I'll send you this whole page of videos. Different people have different ideas and they're all so beautiful!
https://www.youtube.com/results?search_query=antique+sewing+machine+table
SEnd a picture so an evaluation can be made.
We removed the machine and treadle, leaving just the frame and topped it
with a nice piece of slate.
If you can't use the machine, but the wood and base are in good condition: Take the machine out. Remove the fold-over piece by taking it off WITH the hinge. 1> Cut apiece of same thickness wood/plywood to fill in the hole, gluing around sides and using flat screw in connectors underneath, or 2> Remove the pieces where the machine was and cut a piece of wood the same size or slightly smaller than the fold-over piece. Sand and stain the both sides the same, or sand and paint. Use beside a chair or sofa as a worktable, reading table, computer table etc. Position it so the top flips over in front of you when you are sitting! Just remember, you can't pile up stuff on it like we tend to do with end tables! Another option: remove pieces where machine is;remove hinged piece, and hinge, sand, finish and place on top of the cast iron frame for a solid table! I LOVE (and only have 2) pedal machine bases. Mine are fully intact, one with my mom's working 1980's machine in it and one with base and marble top. I didn't remove the pedals of either...ruins the full effect, and if used as a table, it's perfect for books!