Rounded corner guards?
Related Discussions
Looking for an idea to make the bookcase look flush against the wall.
It’s an Ikea Billy bookcase. The cut out for smaller baseboard doesnt work. Would like it to look flush with the wall. Would rather not have to cut the baseboard.... See more
What sheen do I use for shiplap?
Putting Shiplap on back wall of 1/2 bath. Going with white and I was going to go satin, but I am seeing a lot of eggshell?
UPDATED (Pls See Latest Answr) Are these pipe hangers safe/suitable..?
Hello,I needed a pull-up bar and made one using two pipe hangers (1 1/2 inch openings) that I nailed into the ceiling joists with roofing nails and then put a 5 foot ... See more
I am wondering if you can trowel cement/concrete onto the shower walls
There is backer board, it will need the orange waterproofing membrane put on that but instead of installing tiles or a tub surround, can cement be troweled on to the ... See more
How do i do away with the rosettes in the ceiling?
Can you completely do away with the rosettes in the ceiling? I was thinking of doing a 2×3 across where the panels meet like a "farmhouse" look. (By cutting a 2x6 in... See more
Go to wallguard.com they have what you need
Have you considered wire netting or plastic - Garden Dept D.I.Y - Could make a feature like a Column and run Guard full height of room OR Marble look Contact etc. OR Plastic Mirror............Or Stone Clad..........
http://www.wallguard.com/corner-guards/clear-corner-guards/clear-corner-guard-bullnose-radius.html?gclid=EAIaIQobChMIhrna7-jF2gIVDYnICh24aQAWEAkYASABEgJcAPD_BwE
I have the same sill rounded corners in my home. I have some pretty wooden guards I intend to take a dremel to the back side and see if I can round the enough to work. Let us know how & what you do to solve your problem.