Test for a clog. A poor flush means that your toilet drain is either partially or completely plugged. ... However, most clogged toilets are slow drainers. That is, flush water partially fills the bowl but doesn't rush out and clean away the waste.
When it's still flushing, but slow, you can depress the handle just a little bit so that the water starts to fill the bowl. When the bowl is nearly full, flush the toilet. Sometimes the added pressure from the larger water volume in the bowl is just enough to clear the clog.
I'm hoping to save my copper sink, but I am afraid I have totally ruined it. I need some suggestions on how to save it! What can I spray it with, or where can I fin...
See more
This black oily or paraffin type stuff sometimes comes through my hot water line in the second story. Have talked to the water company. They say it isn't them or th...
See more
Maybe try putting toilet cleaner in n let it set bout hr
Test for a clog. A poor flush means that your toilet drain is either partially or completely plugged. ... However, most clogged toilets are slow drainers. That is, flush water partially fills the bowl but doesn't rush out and clean away the waste.
First try a plunger. If that doesn't work, try a snake.
Link to the dishwashing soap unclogmethod. Hope it helps
http://tiphero.com/unclog-toilet-without-plunger/
You may need to snake it out if Drano doesn't work.
When it's still flushing, but slow, you can depress the handle just a little bit so that the water starts to fill the bowl. When the bowl is nearly full, flush the toilet. Sometimes the added pressure from the larger water volume in the bowl is just enough to clear the clog.
Probably something stuck in the bend or cavity of the toilet. Best way would be snake it through or out.
Thankyou to you all, tryed all the normal ways. Snake it next thankyou