How do I frame a mirror?
Related Discussions
Blackout curtains behind vertical blinds
I have two 6' patio doors, and I want to add blackout curtains to keep the sun/cold out. What is the best way to hang them, and what can I use to push the curtains ba... See more
How to make a balloon garland?
Does anyone know how to make a balloon garland or a balloon arch?
How do you distress a gold mirror frame?
I would like to know how can I distress a gold mirror frame to make it look less shiny, and also what can I do to improve the glass shelf and the anchors to improve ... See more
I need an idea to frame my oval shaped bathroom mirrors
How do I restore a mirror, has rust looking stains on glass. Thank You
How do I put mirror on a balcony wall?
I have a half wall on my balcony that blocks the view when sitting inside. How could I attach a mirror to this wall to create a reflective surface?
How do I hang a full length frameless oval mirror on the wall?
I have a full length oval mirror no backing. Want to hang on a wall without gluing, and keep it safe, any suggestions ?
Get some framing material from any place that sells building materials or a craft shop, plus a piece of board/plywood a bit larger than the mirror. Miter cut the corners of the frame, glue and nail together. If the mirror is already mounted on a wall, the framing material can be fastened to the wall. Measure carefully and you will have a nice looking mirror.
First protect the back of it with a piece of foam core or at worst cardboard. I had a frame shop in Santa Monica for 8 years. Cardboard can attract bugs if you are not careful. However, once protected, place into a frame with enough depth in the rabbit to accept the mirror and board thickness. Use either a point pusher gun or points that can be pushed into the wood with a screwdriver. Add eye hooks and appropriate wire and hang.
Tack (using brads) trim around the outside. This is lighter and you don't even have to take the mirror down. Just put 4 sides on and make sure the ends meet or join together as well as possible. If there is a slight gap at that point you can use caulking to smooth it out. Then paint. It is sort of like framing a picture.
Buy some white moulding and cut to fit around outside of mirror.
Answered above