Cork/magnet strip for bulletin board?
![Jewellmartin](https://cdn-fastly.hometalk.com/media/profile/2019/04/09/2127960_14.jpg?size=91x91)
Related Discussions
Blackout curtains behind vertical blinds
![Diane](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-D-605BE8.png?size=50x50)
I have two 6' patio doors, and I want to add blackout curtains to keep the sun/cold out. What is the best way to hang them, and what can I use to push the curtains ba... See more
How to make a balloon garland?
![Noemi](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-N-FF00A7.png?size=50x50)
Does anyone know how to make a balloon garland or a balloon arch?
How do I open this tube?
![Louise](https://cdn-fastly.hometalk.com/media/profile/2017/04/02/65060_1.jpg?size=50x50)
The end of this tube is very hard. I slightly tried to punch the end of a knife into it and also tried a large paper clip but neither budged it. I was a bit timid in ... See more
Do all sewing machines have a presser foot tension regulator?
![Anna B](https://cdn-fastly.hometalk.com/media/profile/2023/10/11/172103_2.jpg?size=50x50)
I am a mid to intermediate level seamstress. I've had two machines over the past 40 years, a Kenmore, followed by a White sewing machine, both very nice sewing machi... See more
How can I stiffen crepe paper?
![Toni](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-T-FF8282.png?size=50x50)
HelloIs there anyway I can stiffen crepe paper leaves?
What type of saw and blade's do i need to slice/ cut agates?o
![Deb31424753](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-D-50E3C2.png?size=50x50)
How do you glue the plastic that water bottles are made of ?
![Melody](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-M-59A1F4.png?size=50x50)
What kind of glue works with polyethylene plastic ? I have tried many kinds with no success.
Hi. I'm not sure what your question is, unless you are asking how to put it together. But here is how I made one for my home office: I bought the cork on a roll at Office Depot (I'm sure Staples has it as well). It was about a foot wide. I used a low-temp hot glue gun to adhere the cork to a piece of foam core -- I used two widths of the cork, one above the other. Then I popped the whole thing in an old frame I had painted to match my office. You don't have to "magnetize" a metal strip; as long as it is not aluminum or bronze, magnets will stick to it. If you can find a flat frame, you can paint it with magnetic paint (yes, they make that now - and we thought chalkboard paint was cool!) and skip the strip!