How can I clean a silver fetish necklace without taking the color from
I bought the necklace years ago from Daniel Ortega in AZ so I know it's good quality. The fetishes are small mother-of-pearl birds that are artificially colored. The silver is terribly tarnished, and I guess it wouldn't be the end of the world if I end up with white birds, but I'd rather preserve the pastel colors.
Related Discussions
How to clean a mirror without streaks?
Every time I clean my mirrors, they end up having tons of streaks and almost look worse than before I started. What could I use to clean them that won't leave streaks... See more
How to clean burns on stainless steel pans?
Help! I burned my pan. How do I clean stainless steel cookware that's been burned?
How to clean shower doors
How to clean glass shower doors
How to clean hardwood floors in the kitchen?
What is the best way to clean hardwood floors in the kitchen?
How to clean my kitchen cabinets from grease?
My kitchen cabinets are embarrassingly greasy. Please share your degreasing tips with me so I don't have to cringe every time I glance at my cabinets.
How can I clean these silver plated frames ?
They have been in storage for a few years so got tarnished along the way. How can I clean these silver frames? They were my parents so I would really love to save the... See more
How to get rid of the peppermint oil odor?
I spilled a 4 ounce bottle of essential peppermint oil. It went all over the counter, down the dishwasher and on my hardwood floor. I have cleaned it all up, but the ... See more
Here's a recipe for a jewelry cleaning solution: 1 tablespoon salt, 1 tablespoon baking soda, 1 tablespoon dish soap, 1 cup of water, and 1 piece of foil. Heat the water in your microwave for 1 or 2 minutes. Then add first 3 ingredients into the water and stir to dissolve. Place the foil in the bottom of the bowl next. Add your jewelry to the bowl and let it set 5 or 10 minutes. Then rinse jewelry in cool clean water. Dry with soft cloth. Discard remaining solution.
Tricky but if you are careful you could use a small paint brush with silver polish. I would first see if you can āpaintā a protective layer of Elmerās Glue over a fetish. Allow to dry completely. See if you can clean a bead next to this glue encased bird (use silver cleaner really sparingly) without melting the glue or discoloring the fetishes. Use a barely damp paper towel to rub off tarnish and neutralize the silver cleaner. Peel the glue off carefully when done cleaning.
I would take the necklace to a jeweler for advice.
Hi! I wouldn't soak it since I think you would damage the design. Having it professionally cleaned might be your best bed, but, if that isn't an option, I would try a silver polishing cloth like this: https://smile.amazon.com/Polishing-Cleaning-Platinum-Jewelry-Tarnish/dp/B01LIJED4U/ref=sr_1_19_sspa?ie=UTF8&qid=1530933990&sr=8-19-spons&keywords=silver+polish+cloth+for+jewelry&psc=1
I sell a lot of silver on Ebay. Jewelry, silverware, serving sets. Silver polish like Wrights and dips like TarnX tend to remove some of the metal. The foil method doesn't work that great and still leaves a grey film that still needs to be removed. I use white toothpaste (not gel) and a damp toothbrush. For large items I use a damp cloth. Also works on copper, brass, gold, porcelain, ceramics, sneakers, plastics, etc. For my sales I needed one product for cleaning everything.
Sounds like a pretty Zuni piece.
Thanks for all the suggestions. I will try them in increasing order of possible damage. Except soaking. I just can't bring myself to soak it in anything - even plain water - since I don't know what was used for color. It's probably not water-soluble and I'm making a big deal over not much.
Hi,
Wash it in washing up liquid and water using a tooth brush, and dry with a soft cloth. Otherwise use a silver wadding or cloth.