Refinishing kitchen cabinets?
Hello Hometalkers!
How do I refinish/paint kitchen cabinets that were originally covered with a contact-paper like material? Underneath the paper, the wood is a little rough particle board-like material.
One of the enclosed pictures shows a corner of a cabinet where the paper cover is coming off.
Thanks!
Related Discussions
Vinyl plank flooring vs pergo (laminate)
I currently have stinky dirty carpeting in my living room and I want to replace it with a durable flooring that can stand up to dogs and kids.
How to remove popcorn ceiling that has been painted?
Does having a paint over a popcorn ceiling change how I'd remove the popcorn ceiling?
How to apply peel and stick wallpaper?
I want to spruce up my walls with peel-and-stick wallpaper. Has anyone used this before and can advise me as to how to apply it properly?
How to stain wood floor?
I've heard staining is a good technique for updating floors. So how do I stain my wood floor?
Need advice for kitchen cabinet makeover
We have decided to paint our kitchen cabinets, but need to know which works better. Chalk paint or Rustoleum's kitchen cabinet kit? If you have used either your opini... See more
I would peel off the rest of the contact paper, sand the particle-board smooth and paint it.
Hello Eds32015352 If you are on a tight budget may i suggest some textured wall covering? Some of the trends now are distressed finishes. Here is a link to some ideas one is paper made to look like pallet wood.
https://www.amazon.com/Blooming-Wall-Wallpaper-Livingroom-Multicolored/dp/B018UILQ7Y/ref=sr_1_25?s=hi&ie=UTF8&qid=1535029367&sr=1-25&keywords=textured+wallpaper There are many to choose from. You can choose waht is best for you decor. Good Luck CinT
i'd do beadboard framed with moulding. although the picture attached isnt from my kitchen, it is what we did, and it turned out great! we used beadboard paneling framed with 1x3 inch fir moulding. we did a light grey-green stain wash that brought out the wood grain, and then we put on a coat of low sheen polyurethane for protection. they look fantastic! refacing was the way to go for us!
Valspar has paint that adheres to metal, plastic etc. I like the frame idea you are doing. It will keep the veneer in place and hide the peeling on the one door..I used the valspar on vinyl siding to freshen up the trim..it looks great, no peeling, been over 6 mos. Good luck..
Hello HomeTalkers. We decided to go with the shaker style trim and white cabinet paint. Here is a progress picture of the cabinets after adding the trim. They’re still uncaulked and unfinished.
Looks terrific so far! Looks like you ordered new cabinet doors...so nice and simple and classy!
Here is the finished product!! Thank you all for your valuable suggestions!