I'm going to paint my front door a deep red.
The door pictured here isn't mine, but one similar to the color I'll use -- a deep red. I used this same color on my split foyer stairs so have experience with this paint. On the stairs, I first used a gray primer, then put on 3 coats of high gloss paint (sanded ever so slightly between each coat), then added 3 coats of poly. So far, it's stood up super well. I don't have kids who would brutalize this new door so it will be well-cared for but I still want to do all I can to try to ensure the paint will be applied correctly and last a long time.. I'll paint it before it's installed. Question: Since I'll poly the door, I'd guess using high gloss red paint wouldn't be necessary and might just slow my progress? If that's true, what's the best paint to use -- flat, satin, etc. And do I need to lightly sand between each coat, anyway? Or, without gloss, is that step unnecessary?
Related Discussions
Should I paint or stain my oak kitchen cabinets?
I was wondering if you could help me with something -- I have an entirely oak kitchen. I know it's the rage now to paint or gel stain cabinets. I've been considering ... See more
How to paint a metal front door?
How do I paint my front door? It's metal.
How to paint grout?
How do I paint grout to change the color? The grout is in great shape, but the color - meh.
How to whitewash a brick fireplace?
What is the best method to whitewash bricks surrounding a fireplace?
How do I choose color for my front door of my red brick home?
How do I paint the glass panel on my front door?
How do I paint the glass panel so that it looks like stained glass and not so see-through?
Make sure your paint is exterior rated. Usually poly is not and will turn chalky with exposure. Just a high gloss exterior paint should be good enough with out the poly.
Hi Louise. We were in England in 2002 and I fell in love with all the blue doors. We painted ours when we got home. To the best of my knowledge we just used the paint on this 1905 previously unpainted door. My husband recently did one that is upstairs. It is Benj Moore paint and he used the same can he had used in 2002. My husband is an artist and he knows the properties of paint pretty well. So far so good for us. This may well be an porch and deck paint, cause I know we used it on our steel bulk head doors too. Good luck! I love your color!
I would ask these questions of a pro in the paint store ( not a big box store) but I would also look into a marine grade paint that’s made to withstand the elements, or maybe an enamel
You definitely want to use an exterior paint. Also consider the amount of sun exposure your door will get. If it is south- or west-facing, red tends to fade (even with exterior paint. I have a red front door. It is wood with previous paint that I covered in one coat of gray primer and two coats of red exterior paint. My door is north facing and is still in good shape after 12 years! Note that this door is not the door we come in and out of each day.
I thought about the fading tendencies of red but my yard has more shade than sun so I think it will hold up OK. A neighbor whose yard is also shady has a red door that has held up amazingly. I'm going to visit Sherwin-Williams and get their opinion, too. :-)
You need good exterior paint in satin, gloss or high gloss if that is your preference. No Poly....not necessary with the paint!!!
Another thing to be careful about is the door exposure to the sun. The product information sheet on some steel entry doors warns about doors that are exposed directly to the hot sun: If the door gets direct sunlight, it should not be painted a dark color. This was a big disappointment to me on a home we owned!
I've just bought my Sherwin-Williams exterior hi-gloss deep red paint and will start painting the door in a basement room on saw-horses in the next few days. I plan to apply Zinsser Bulls Eye 1-2-3 gray primer first and then put about 3 coats of paint on the door, sanding ever so slightly between each coat after they've dried thoroughly. So now the question is -- should I use a roller or brush? The door is a smooth fiberglas and obviously, I want it to look as smooth and nice as possible. I used a brush when I painted my interior bannister this same color because it didn't seem to lend itself to a roller. And IF I go with a roller, which kind will give me the best, smoothest finish? ALSO, the between-coats light sanding --- should it be with very fine steel wool or very find sandpaper or does it make a difference?