How to replace a few rows of tile?
I had to have a bathtub replaced and the bottom 3-4 rows of tiles were removed. I will be replacing the tiles myself - something I’ve never done before. I will get a contrasting color tile instead of trying to match the current tile. I don’t want to re-do the whole thing - just what was removed. The remaining tiles are all in good condition and the adhesion/grout is fine. Any tips/hints/suggestions? Once I grout the new section, is it ok to put a new layer of grout over old AND new so it looks uniform (without removing old grout from tiles that were not removed). Thanks!
Related Discussions
Best product for sealing very porous tile?
Hi fellow home talkers! How are all of you doing? If anyone could help me out...I would really appreciate it! We have a very porous PORCELAIN tile in our kitchen. ... See more
How do I remove vinyl tile adhesive that has leaked thru the seams?
These vinyl tiles have been our floors in our vacation retreat house for a few years. It began happening within a few weeks after installation. Of course we complaine... See more
I tiled my floors and there are small gaps between tiles how can I fix
How do I fill gaps in vinyl tile??
We have some vinyl tiles on our bathroom floor that have a few gaps. We have tried using some caulking but that didn't work very well. Any suggestions on what else we... See more
How to re-tile shower floor?
The tiles are coming off the floor of this shower floor. It was built in the ‘70’s. I really would like to replace so it can be SCRUBBED REALLY GOOD! How difficu... See more
How do I paint ugly tile in my laundry room?
The tile is a white yellow tile which previous owner cemented it down. It can not be torn out without ripping up floor bottom. Can ceramic tile be painted and withsta... See more
What’s to be done when ceramic tile has been improperly installed ?
What options do I have with improperly installed ceramic tile flooring -throughout my entire home? The work is so poorly done that I cannot walk barefoot anywhere. ... See more
Hi. The new grout will be too thin over the old grout to adhere properly. Consider painting all the grout when you've finished the job. That way it will all blend. Good luck.
As long as the old grout is in good condition and not moldy you should be able to grout over it to match, but it might rest higher than the new install since it won't settle into the lines as much as what isn't already set.
Hi LAlady, use an epoxy paint. There are grout line pens that make it quick, but any epoxy will do.