How to finish my shiplap wall?
![Sandi](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-S-FF00A7.png?size=91x91)
![](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-R-69E0FF.png?size=50x50)
![](https://cdn-fastly.hometalk.com/media/profile/2020/07/12/1281282_3.jpg?size=50x50)
![](https://cdn-fastly.hometalk.com/media/profile/2020/07/09/1509692_2.jpg?size=50x50)
I put up wooden planks on both sides of the wall in the corner of my dining room. They run alongside the door frame on one side and the window on the other wall. This is to create my own coffee station. What to use to trim the sides...... thinking quarter round but not really liking the idea. Would just be trimming the top
Related Discussions
Vinyl plank flooring vs pergo (laminate)
![Lynn Turnbull](https://cdn-fastly.hometalk.com/media/profile/2016/06/24/7796677_1.jpg?size=50x50)
I currently have stinky dirty carpeting in my living room and I want to replace it with a durable flooring that can stand up to dogs and kids.
How to remove popcorn ceiling that has been painted?
![Quilter2](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-Q-F1C40F.png?size=50x50)
Does having a paint over a popcorn ceiling change how I'd remove the popcorn ceiling?
How to apply peel and stick wallpaper?
![Melissa](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-M-FF00A7.png?size=50x50)
I want to spruce up my walls with peel-and-stick wallpaper. Has anyone used this before and can advise me as to how to apply it properly?
How to stain wood floor?
![Honny GrownFolk Will](https://cdn-fastly.hometalk.com/media/profile/2017/08/21/29392702_1.jpg?size=50x50)
I've heard staining is a good technique for updating floors. So how do I stain my wood floor?
How to redo walls and cabinets in my mobile home..
![Kimberly Nicole Owen](https://cdn-fastly.hometalk.com/media/profile/2015/01/11/2053656.jpg?size=50x50)
I'm wanting to remove the strips that are on the walls of my mobile home and repaint the cabinets. I've attempted to redo my bathroom and had a HORRIBLE time putty-in... See more
Should I sand my walls or just redo the sheetrock?
![Anthony Goad](https://cdn-fastly.hometalk.com/media/member_1139045765372755_1139045765_1160652692_n_9264b3346c76dd784d34635c40cf568a.jpg?size=50x50)
We bought a house and the walls in the basement were stuccoed by what I would believe was a five year old. It is very thick and its not level. Its so "pointy I have a... See more
For the top, a simple crown molding would work.
Maybe timber (from wooden plank) slim wedge shape to fit gap would probably be less noticable
For the sides use some thin wood strips about 3/4" wide same thickness as the boards. For the ceiling area use 3" or 4" baseboard but turn it upside down. Stain same color as the shiplap. Crown molding would look a little off and you would need to compound cut returns on the ends. Unless you were to put crown molding all around the whole room.
I agree with William. Pieces of crown molding would look unfinished. Check your local Home Depot. There are a lot of choices if you want a patterned piece or just trim you can stain to match wood. I finished off the sides of my fireplace with thin strips that had a vine and leaf design embossed into the wood strip.
I’m like William, use similar or same wood cut into narrow strips. At the top don’t miter the corners, as the wood is to give a rustic look. Keep it rustic. Just frame the outside upper portions above the door and window areas. Say about 1 1/2 wide pieces laid flat. The other option (that I like better) is to rip the strips into pieces that stand up like a picture frame, like edging in your garden so that the frame stands higher than your strips, and miter the frame edges. It still keeps it rustic but with a polished flare. 3D
I too agree with William! If you want a more industrial look, use some steel flat bars
They sell a metal tile edging called schluter at Home Depot, it sits under the edge and flush against the edge of the material. I have included a photo below with tile application. I’m not sure if you have room to slip it under the edge of the wood but it gives you a great profile, has different edging options, different colors and is relatively inexpensive. You could install with adhesive. The photos are of the flat profile but you can have a rounded edge or angled edge as well. There are also different depths of profile, it might work for you.
It is gorgeous. I don't think crown molding would be appropriate. Thin strips"think yard sticks" or metal strips are perfect.
We had crown molding already, so it looked off to just leave it there. We added a small shelf about 4” from the ceiling. As I can see from the pic, we staggered the boards bc one side was in an area where we couldn’t trim. Here’s pics
Love the wall, and your paint finish. How did you stain it/What colors and brand?
Schluter would be a great idea but would have to be put under the ship lapwhich is already finished could be tricky. I think William had the best finish idea. Thanks William.
I like the look but would just trim a board to the width you want and install that as your trim. Anything else would spoil the look.
I like it plain , just the way that it is ...
Not seeing the rest of your room or knowing you decor hard to say, but just a few ideas to toss... Thin wood strips stained the same would work. Glue hemp cord or rope around your edges. A metal striping for an industrial look. I also love the way it looks now. You did a great job.
Ilike joy’s idea of trimming with the ship lap it would frame it and not take away from the whole ship lap thing going on.
When we finished our wallpaper job and it needed an ending, we used corner molding for the ending. Any kind of thin strips of wood would probably work......whatever your choice. Work with it.......it WILL need a finishing look.
I like the shelf idea, and then place either, family heirloom or antique china, pottery..., or a greeting you can change out at the different holidays, either lit up, or metal, or wood.
since you're only "finishing" the small section at the top ?? I'd just use thin strips of what you used for the entire wall - matches well enough and won't jump out and scream at you...
no need to do ANYTHING to the top - if you DO go with crown molding...you'd have to continue around the room??
OR... use HUGE chunky crown - to call attention to your COFFEE CORNER! wow!
re-thinking this... you COULD just use the same "Trim" as the windows... just take it up to the ceiling from where the window meets it... simple
I was going to suggest what Trudi suggested, hemp style rope tucked along the edge at doorway then up across the top. I once put cedar shingles on a wall in my living room so I love the lap boards! The shelf was a good idea too! That odd spot at top can always be covered w/strip of lap board or brown marker to hide the white! I do desperate things at times! ;)
I agree with Williams idea is best. Good luck, it looks gorgeous already!
Did you finish this project? How did it look? Pics?
Home Depot carries all sorts of trim pieces. Some have designs cut into the wood, so many choices for the side. I agree with not using simple quarter round.
Her's a post that might help https://www.youtube.com/watch?v=HDKRuqnuVSQ
I like it as, then went back and saw the white peeking through at the top where it meets the ceiling, either color it in or do the thin strip as William suggested.