How do I make a stand for our desk-top printer with shelves below?
looking to have three shelves below the printer to keep paper, and three sides covered with front open.
Related Discussions
Can I ask Home Depot to cut my wood?
I'm seriously considering making this twisty side table that I fell in love with here on Hometalk (By Chasing A Dream), but cutting the wood is a bit too ambitious fo... See more
What to do with our livingroom ceiling?
We took the old popcorn ceiling off in our livingroom and thought we could just paint it. We fixed some hairline cracks where the joint in the sheetrock are, primed a... See more
What type of hinges are used on the top of this folding table?
Does anyone know what type of hinges are attached to the top of this folding table? The legs fold in toward the back then the top folds down flat against the legs.
How would I be put on these wheels ?
I am planning on doing a mobile wood bench using 2x4. I have these wheels but have no clue to put them on
Sealing/smoothing crate wood
I am turning the sides of an old wooden crate into a coffee table top. The wood is similar to pallet wood: unfinished and prone to giving splinters. How might I go ab... See more
How do I make DIY furniture sliders to move heavy furniture?
HOW DO I MAKE FURNITURE SLIDERS TO MOVE HEAVY FURNITURE.Best furniture sliders!Move furniture easily with Round furniture moving kit that Amazon reviewers swear by!
You could adjust this one to however many shelves you need to add,how wide you need it and add casters on bottom for ease of moving & cover sides with either MDF, plywood,even wood from old pallet or scraps,etc. https://makezine.com/projects/sturdy-2x4-printer-stand/
Hi Marcus,
Here's an idea from a fellow Hometalk member. The only thing that I don't know is the size of your printer. If it will fit, this is an easy project but it will only give you 2 shelves unless you add another Parson's table and make it taller. I hope this helps you. Wishing you the best.
https://www.hometalk.com/diy/build/shelves/kitchen-island-storage-self-hack-35313421
Kitchen Island/Storage Shelf Hack
A three shelf bookcase? Or a three drawer dresser....take out the drawers and put a thin board (plywood) where the shelves slide in. Paint all the same color.