How do I replace one floor tile?
One tile on my floor has a crack in one of the corners. It is a tile that is one tile away from a wooden floor. Can one tile be removed and another replace it? Can I fill in the hole that is fight near the corner? Help me!
Related Discussions
How to get rid of mice?
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
How do I fix squeaky hardwood floors?
Replacing tile, I can't find tile to match, what can I do?
I took a wall out between my kitchen and "formal Dinning room". There was no tile where the wall was. Now I cannot find tile to match what is there. It is only 6 to 8... See more
How do I repair caulk between the floor tile and the baseboard?
We recently had new floors put in and the caulk to fill the seam between the floor and the baseboards was very poorly done. It is uneven, with rough edges, and just l... See more
https://www.youtube.com/watch?v=lnIcMJlr73o OR https://www.youtube.com/watch?v=4MDsciUzG4U AND ONE MORE https://www.youtube.com/watch?v=4Tp50Mno1Zk
Hi Lynn,
If the tile is white, you may be able to get away with patching it with ceramic filler, but if chips are too large, you can chisel it out and replace it. Make sure you clear away the old adhesive before hand and clean up immediately after you re-grout.
Perfect videos from Lynn. You can also repair. Whatever you choose.
How to Repair Holes or Cracks in Ceramic Tile
Patching unwanted holes in glazed tile like this can be a tricky proposition. Here's a solution that may not always be perfect, but will make a big improvement. Polyester resin or auto body filler, often used to repair car bodies. Mix up a small batch by adding some hardener and stirring it thoroughly. Using a putty knife, press the resin into the hole slightly overfilling it. Then just as the material begins to harden while it's somewhat rubbery, trim off the excess with a razor blade.
Next use 600 grit sandpaper to sand the filler smooth. Wetting the paper with water makes it work best. Now it's time to try and match the color of the tile. A porcelain touch up kit which is available at most home improvement centers comes with several different colors of paint. You can also use artists acrylic paints available from Michaels, Hobby Lobby, art supply stores, and online.
The trick here is to mix these different colors together until we come up with one that matches the tile. Apply the paint with a small brush. You can test it on a nearby tile. When you get it the way you want it, then just paint over the patch and let that dry. Give it one final sanding with that very fine sandpaper and you'll have, well, maybe not a perfect match, but something that's a heck of a lot better than what you started with.