These are the two types of shelving.
How do I attach shelves to a wall?
I have several shelves I want to hang that have key hole backs. Every time I’ve tried to hang them, the shelf doesn’t sit flush to the wall. How do I attach them and not have them fall forward?
I know I need to use a screw to attach this to the wall, but it still has a gap along the top edge.
This one looks like I need a ledger board to attach it.
This is the front of the one with a key hole for hanging in a screw.
The front of the other one.
Closer picture of shelf without key hole hanger.
Related Discussions
How do I make a storage unit with shelves between wall studs
How do I hang shelves on plaster walls?
I have been struggling to hang a few things, but when I try to drill into my plaster walls (house was built in 1900!) I can only drill about 1/4 of the way, no matter... See more
How do I mount a shelves made out of cardboard to the wall?
How do you attach shelving to concrete walls
I want to add cheap shelving to concrete walls in basement for storage.
How do I mount a few shelves on a bathroom mirror?
There's absolutely no place else in our tiny bathroom to add some storage. The space I want to use is about 3' wide and 2 1/2' feet tall. I'm wanting to get items OF... See more
How do I build shelves for inside cabinets?
I want to make shelves to safe space inside my cabinets.
Can you take a picture of the shelf holder attachments on the wall? Are the "holder" attachment / part adjustable? Meaning the you can 'screw' or install (hammer) them into the wall further? It seems like they're sticking out a bit too far still. This seems like a trial and error sort of task.
Here's an article that might help - https://www.familyhandyman.com/woodworking/shelves/how-to-hang-shelves/view-all/
Are you using plastic wall anchors? The screws need to be barely flush with the wall. Just adjust the screws till the shelf slips on snuggly. May take a few tries to get it right.
https://www.youtube.com/watch?v=V3r2ooRwVdE but --- if the WALL itself isn't totally FLAT, there may be minor gaps where the shelf touches the wall
Those look exactly like the shelves I got rid of, for exactly the same reason.. NO WAY were they going to sit flat against the wall. Now, I would probably make some wood pieces to fit in the slots and set the shelves on those. The hole "protector" on the top one pushes it away from the wall & causes a gap. The plastic hanging bar on the other one just doesn't fit. They were made to fail.
Looks like you need to make cleats to hang the last on e
The metal key hole sits on the surface on the back of the shelf, it needs to be recessed so it is flush with the back of shelf. The screw that goes into the wall needs to be a flat head screw. Then you turn the screw in or out to get a snug fit. The other shelf should come with separate angled cleats that screw to wood 2x4’s inside the walls. If not , angled cleats need to be made from wood with the angle similar to the shelf angle. The separate cleats are attached to the wall so that the shelf cleats lock in to the wall cleats.
Bonjour. Vous avez besoin d’un morceau de bois avec l’angle inverse de l’autre morceau que vous fixez au mur. L’angle vers le haut et c’est très solide.
Bonne journée.
Hi, I may be coming in a bit late here, but these are designed to hang on 2 screws that are in wall plugs or directly in a stud, the video show a similar mount type
https://www.youtube.com/watch?v=j3I48Onmf_4