How do I make cabinets & a drop in the sink for travel trailer?
Want to make cabinets for kitchen & be able to use original double sink & drop it in with counter top to attach to thr cabinets?Easiest, cheapest way possible?
Related Discussions
How do I make painting tripods for cabinet doors?
Saw it on here, cannot find it. Going to paint kitchen cabinets, would like little pointy tripods for doors to rest on while painting/drying. Thanks y'all!
How do I make a storage cabinet for washer and dryer outside?
How do I make a rolling standing spice cabinet next to fridge?
How do I make a template to drill holes for cabinet hardware?
We had cabinets installed without hardware. Now we want handles and knobs but will need to put them on ourselves.
How do I repair my water-damaged sink cabinet?
The cabinet are still in good shape and only 10+ old. I watched YouTube and thought it would be easily done to get the board replaced. But hell no. Like the pics show... See more
Hi Tina, Home Depot shares some base cabinet installation instructions on their site... maybe it can help you: https://www.homedepot.com/c/how_to_install_cabinets_HT_PG_KI
Installing in a travel trailer is far different than installing in a home. There are weight and balance issues. There are many many RV renovation sites out there, you just need to spend some time sifting through all of them. Here are a few to get you started.
https://goneoutdoors.com/build-rv-cabinets-7625335.html
https://gnomadhome.com/diy-van-build-kitchen-cabinets/
https://www.doityourself.com/forum/pick-up-trucks-large-passenger-cargo-vans-campers-trailers-rvs-motor-homes/298889-advice-replacing-travel-trailer-cabinets.html
Head over to your library, newsstand or home improvement center and pick up a magazine or how to book on RV renovation. Also, find your local RV supply or repair shops, they can help you out too. I am lucky, we have a Camping World 5 miles or so down the road.
Here's info for getting this job done right! Have fun with your travel trailer, Tina!
https://www.youtube.com/watch?v=q_IWggV8AH4
Take and confirm lots of measurements. Making a cabinet can be as simple as buying them, or a small vanity if space is tight. Go online to learn how to do this. Not a complicated thing, just be patient. Measuring is the critical part. Make templates using cardboard, even newspaper if you wish. You can finish to match the trailer insides. Don't get too nuts over the design, home made things are best done simply. My husband is a wiz at this kind of stuff. It might take more time than you figure though.