Building codes and planked walls
-
Debbie Harris on Aug 03, 2014Most building codes do not require anything under your wall covering. Studs and insulation then whatever you're going to cover the wall with. But your best bet incase you're not sure is call your local building dept. and ask.Helpful Reply
-
-
Lori Jackson on Aug 03, 2014Debbie, here in rural America, things are pretty loose and fast. Depending on the advice of strangers on this one. :-)Helpful Reply
-
-
Jeanette S on Aug 04, 2014Since this is just for cosmetic purposes, why not use the overlay method (faux planking over existing surfaces)? It would eliminate the mess of having to clean up all that blown in insulation, which if you did not install, you do not know the age or content...there could be asbestos issues! Asbestos can be costly to remove and very unhealthy once disturbed! You do not want to deal with that! It is always best to leave Pandora's box unopened!Helpful Reply
-
-
Lori Jackson on Aug 04, 2014Jeanette, we do know what is in those walls as we did remove plaster and lath for the installation of a new front door. Prestige A & R--I was pretty sure that we would need to drywall before planking if we decide to remove plaster and lathe. Our approach thus far has been if the plaster and lath is in good condition (no cracks or deterioration), leave it alone. I will pass your advice onto the hubby. Jeanette, I am all for the faux planking as it looks lovely and is cheaper!Helpful Reply
-
-
Z on Aug 04, 2014Lori, I found info on building codes in your county, but not sure it discusses what you need to know. I'm just on a quick break from housework and don't have time to read it all. If you can't find what you need I'd advise calling your county offices to make sure. http://www.neo.ne.gov/home_const/iecc/counties/custer.htm I'm with you on not going to the mess of removing the plaster and lath,if for nothing else other than the mess it would make. Breathing in that kind of dust isn't healthy either. I'm wondering if your hubby isn't concerned about the thickness of the planks matching up to your current door and window trim?Helpful Reply
-
-
Moxie on Mar 19, 2016I would totally go over it. No different than paneling in theory. If the plaster is sound and the roof is good there spuld not be excessive moisture anyway. Also plaster from the early 60s often contains asbestos. No harm if not disturbed.Helpful Reply
-
Related Discussions
Blackout curtains behind vertical blinds
I have two 6' patio doors, and I want to add blackout curtains to keep the sun/cold out. What is the best way to hang them, and what can I use to push the curtains ba... See more
How to make a balloon garland?
Does anyone know how to make a balloon garland or a balloon arch?
How can I safely remove a photo that's stuck to the glass in a frame?
Occasionally I've had the problem of photos sticking to the glass inside frames. First, I'm not sure what's even causing it. I don't use any moisture when dusting the... See more
How can I make this hidden door more hidden and less hideous?
I have a hidden door though it doesn't look so hidden at the moment and I like the appeal of a hidden door. We do need to use the door, but not often. This is in a b... See more
How can we camouflage the siding in our add-on room?
We live in a mobile and have an add-on room where a covered patio used to be. Now it's part of our living space and we would like to cover or camouflage the exposed a... See more
Would someone tell me what I'm doing wrong with command strips?
First one fell off in the bathroom - okay, maybe moisture. In the kitchen - fridge, inside cabinets and on tile walls. All fall off. Everyone else seems to love them!... See more
How to hide this circuit breaker?
Entry way update. I bought a co-op and started renovating but am stumped as what to do with the entryway. The circuit breaker box is smack in the middle how the heck ... See more