How to make a brick patio with brick & sand?
Related Discussions
CAN U LAY PAVERS OVER AN EXISTING BRICK PATIO?
CAN YOU LAY PAVERS OVER EXISTING BRICK PATIO?
How do I clean a brick paver patio that is discolored
There is some black discoloration and moss between th bricks
How do I scrub moss out of brick patio
I tried pressure washer but it makes a mess on the house and pool cage. Is there a vacuum you can use with a rotating brush that would work on brick patios with moss?
Pavers vs flagstone or brick for patio
What is the cheaper way to go, pavers, brick or flagstone for a patio? Which is the easiest for a homeowner to do without much experience in laying a patio?
How can I make over my cement porch floor to look like brick?
I have cement floors on my porch and they are stained.cj
If you're in a freeze thaw area , you'll need to dig down, install gravel, use a vibration tamper before adding a sand layer. Then place bricks in your desired pattern (some cutting may be required), and spread sand . Vibrate compact again. Fill with more sand. It should not come to top of brick edges.
Note that sand will attract ants. You can use polymeric sand, instead, sweeping lightly into joint areas, then wetting it down after you've filled joints and vibrate compacted.
Here's a good tutorial: https://www.youtube.com/watch?v=-TuRkavGAN0
Dig down about three inches into the soil. Lay down landscape fabric. Pour sand on top and level it. Lay your bricks even with the ground making sure they are level. Pour sand over the brick and sweep into the joints until no more will go. Mist the surface with water. Add more sand if needed.