What is the best way to dull the edges of glass?
Hi i am working on my master bathroom renovation , i want to put a few shelves between the studs . I have my design all planned out , but i am not sure which way to go for my shelves . I want to use glass and i know how to cut it , but i am not sure of how to dull the edges , so it will be safe , and look nice , as well . Any suggestions would help ! thanks !
Related Discussions
Any ideas on how I could use leftover lattice? Inside decorating?
I have leftover lattice and would like to use it for some sort of indoor decorating project. Any ideas on a good use for it? It looks like this, just plain unfinished... See more
Planting under shady tree with roots
I have a jacaranda tree in my front yard with roots growing above ground. The tree has fern-like leaves that have prevented little growth of grass underneath. What ca... See more
Alternate way to install kitchen shelves that doesn't include drilling
I want to display my bowls, and other colorful accessories in my tiny tiny kitchen. There are no cabinets! Except those very high ones that i can’t reach! So all I ... See more
How do I remove a floating shelf?
Hello! We moved in to a new house and the previous owners had installed some floating shelves. How we we can’t work out how to take them off. We’ve tried pulling ... See more
Where to purchase insert tubes that go between plastic shelves?
Does anyone know where I can purchase these tubes? The manufacturer does not sell them separate from the shelves. I also cannot find PVC pipe at 1 1/8" to cut to fi... See more
What should the height/spacing be between 3 shelves in a living room?
Want to hang 3 shelves roughly 29 inches long/ 6 inches high. I’ve got 8 foot walls, cathedral ceiling. We up cycled some old barn wood and some metal troughs. Used... See more
Fine grit sandpaper about 200 grit or an emery board.
what kind of glass are you using?? regular window,thick table,or is it safety glass--Laminated or tempered. It'll matter on how to cut and polish edges. usually glass shelves are safety glass. here's ways to sand edges down https://www.cratex.com/glass-polish/sanding-glass-7-proven-methods
Sand it down with course sand pPer
Use 120 grit wet sandpaper and lightly sand around the edges until smooth...change sandpaper as needed