How do I weld or glue white metal?
![George](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-G-605BE8.png?size=91x91)
![](https://cdn-fastly.hometalk.com/media/profile/2020/12/10/50263351_1.jpg?size=50x50)
![](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-L-605BE8.png?size=50x50)
![](https://cdn-fastly.hometalk.com/media/profile/2019/06/12/43073967_1.jpg?size=50x50)
Related Discussions
Chair rail height?? At the sill or below or around?
![Mindy DuFlunker](https://cdn-fastly.hometalk.com/media/profile/2016/04/08/5512751_1.jpg?size=50x50)
I am running chair rail around a bedroom. The marble sill is 40" from the floor the window is 39" high. Putting printable wallpaper on the bottom. Painting the botto... See more
Best nail gun?
![Meredith Moen McConnell](https://cdn-fastly.hometalk.com/media/profile/2015/10/28/2774983_1.jpg?size=50x50)
I am very new to working with tools and am wondering what the best type of nail gun I should buy to work with pallets. I am interested in redoing a wall with pallets ... See more
How can I seal old chipped wood?
![Kim farrell](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-K-FF00A7.png?size=50x50)
I have a few amazing pieces that are old and the paint is chipping. I love them just the way they are but hate the flakes that constantly come off! What to do so it'... See more
How to make a magnetic picture board to display (travel) magnets.
![Gfe28073611](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-G-FF00A7.png?size=50x50)
Cutting a wooden spool
![Linda](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-L-FF8282.png?size=50x50)
Can anyone suggest the best way to cut a wooden spool in half length wise. Approx. 16 "tall, ends are wood and the center is thick. I have several different power saw... See more
Not sure I understand white metal. Do you have a picture? What are you attaching it to? Itself or something else? Is it heavy?
It’s an exterior low light fixture
Use two part epoxy glue. JB Weld is a good brand.
I’ll try thanks!!
Welding is like glue for metal
I have been working as a welder for several years, but I have never heard about what is discussed in your post. Perhaps I don't quite understand your question? I'm not sure I know what white metal glue is. I would be grateful if you describe your question in more detail. When I chose my profession, I relied on the opinion of my family about the chosen job. It will always be preferable to have a profession that will not disappear on the labor market for at least another 40 years. Find answers to all questions related to this here https://weldingnearyou.com/