Has anyone done their own molding?
I need to put molding on the bottom, where the floor connects to the wall. I would like to try and do it myself. Does Home Depot or Lowes cut wood for you?
Related Discussions
Looking for an idea to make the bookcase look flush against the wall.
It’s an Ikea Billy bookcase. The cut out for smaller baseboard doesnt work. Would like it to look flush with the wall. Would rather not have to cut the baseboard.... See more
What sheen do I use for shiplap?
Putting Shiplap on back wall of 1/2 bath. Going with white and I was going to go satin, but I am seeing a lot of eggshell?
UPDATED (Pls See Latest Answr) Are these pipe hangers safe/suitable..?
Hello,I needed a pull-up bar and made one using two pipe hangers (1 1/2 inch openings) that I nailed into the ceiling joists with roofing nails and then put a 5 foot ... See more
I am wondering if you can trowel cement/concrete onto the shower walls
There is backer board, it will need the orange waterproofing membrane put on that but instead of installing tiles or a tub surround, can cement be troweled on to the ... See more
How do i do away with the rosettes in the ceiling?
Can you completely do away with the rosettes in the ceiling? I was thinking of doing a 2×3 across where the panels meet like a "farmhouse" look. (By cutting a 2x6 in... See more
Buy a miter box. Stores will cut the wood but it will not be right and I doubt they will cut all of the angles you need.
Here is a cool molding project with lighting! I'm going to have to try this one myself! https://www.hometalk.com/diy/decorate/rooms/how-to-install-foam-crown-molding-and-led-lighting-3985282
How to Install Foam Crown Molding and LED Lighting
You can do this yourself. Yes, HD and Lowe's cut for you, BUT they are not precise, so I would get an inexpensive mitre box and rent a saw from a tool supply and make the cuts yourself.
https://youtu.be/JMt6wyU5dh0
https://youtu.be/PQsPwY-eoFI
https://m.wikihow.com/Install-Baseboards