How do I keep fitted sheets on the bed?
Related Discussions
How to get rid of mice?
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
How do I fix squeaky hardwood floors?
How do I keep the bed risers from slipping?
Apartment living, I store things under the bed. When I had carpet, the risers stayed in place. Now I have laminate and the risers move and the whole bed collapses. I ... See more
What can I do to keep the little legs holding my bed frame up
They don't stay straight but angle to the floor
Hi ! Go to a dollar store they usually have sheet clips ! It is a piece of flat elastic with a clip at each end . To use these they go across each corner , under the mattress clip it across the corner to hold the sheet in place .
Hello Jewel,
You can buy Sheet Clips, a bit like braces or suspenders ,for the purpose, or use velcro maybe........
Check this out:
https://www.thebetterbedder.com/
Hello. Sometimes it takes adding an accessory like fitted sheet suspenders or replacing your elastic to make it tighter.
Mattress have gotten very tall over the years and generous deep pocket sheets seem to be more common than the fitted sheets of years ago.
Alternatively another option would be to sew more elastic on your sheets to alter to make a tighter fit. Heres some helpful links that might give you more ideas and details. I hope this helps.
https://www.ehow.com/how_5549201_repair-stretchedout-fitted-sheets.html
https://www.linenslimited.com/blog/this-is-why-your-bed-sheets-keep-coming-off-4409/
I simply cut 4 pieces of sturdy elastic about 10 inches long and sew across the corners. To be sure of fit you might want to place the sheet over the corner of the mattress to get the placement you want. Then just use your first one as a guide to do the other 3 corners.