Back of false front cabinet. Notice natural color strips of wood. Do I need to remove those to expose screws holding the false front cabinet or is it glued on?
How do I remove this false front cabinet?
I’m looking to install tip out shelves and I don’t know if my false front cabinet is glued on or screwed on with the screws hidden behind a lighter strip of wood that is screwed to the sides. In the picture please let me know if you think there are screws behind that lighter strip of wood. There is a strip at the top and bottom.
I tried using a razor blade on the back, but it kept getting stuck.
What I’m trying to install.
Related Discussions
How to get rid of mice?
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
How do I fix squeaky hardwood floors?
How do I remove hot steam stains on wood table?
I have white cloudy marks on oak table from heat- how do I remove them?
How do you remove painted, striped screws off old cabinet doors?
I am trying to remove the cabinet doors to my tiny laundry room. It's so closed in and thought if I remove doors it might open it up. Problem is that the hinges were ... See more
It looks like the round hole may be for a recessed screw. Are there others like it? Insert a Phillips head screwdriver in the hole and slowly turn it to see if it seats into a screw.
It's usually screwed or stapled on. The large screw on the vertical piece screws one cabinet to the next. Don't mess with those. I would use a putty knife and see if it will pry off from the front. Loosen it up enough and you can see how it's mounted.
If you find it too difficult to redo your cabinet - what I did was buy a wire basket and hung it on two screws to hold sponges etc. on the inside of the cabinet door. I lined the basket with a cut placemat to hold any drips.
It looks like the false front drawer is just brad nailed on. you can see the brad marks on the frame...probably three across the top and 3 across the bottom. Take a piece of 3/4 board and place it on the backside of the drawer and hit it with a hammer...should loosen drawer enough to pry away from cabinet. You will need to cut off the brads in frame..might be able to pull them through...or hammer them back enough to pull them out from the inside. Dont mess with the screws you see..that's joining cabinet frame to next cabinet.
Hi everyone and thanks for your help. I wanted to give everyone an update. I actually found a sticker from the manufacturer on the inside of the cabinets and found them online and called them. They told me that usually they glue on false front cabinets. Seems like they do not make high quality products. I ended up not wanting to take the risk of ruining the finish/paint and just returning the hinges and containers. Unfortunate, as I thought tip out shelves would be a great thing to have. Thanks anyways everyone!