How do I remove super glue from a laminate counter top?
![J Burke](https://cdn-fastly.hometalk.com/media/profile/2018/02/26/31761818_1.jpg?size=91x91)
![](https://cdn-fastly.hometalk.com/media/profile/2017/11/08/5943670_1.jpg?size=50x50)
![](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-G-69E0FF.png?size=50x50)
![](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-D-69E0FF.png?size=50x50)
Related Discussions
How to get rid of mice?
![Jessica Hill](https://cdn-fastly.hometalk.com/media/profile/2021/08/22/107358_1.jpg?size=50x50)
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
![Abby](https://cdn-fastly.hometalk.com/media/profile/2021/02/07/50639059_1.jpg?size=50x50)
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
![Sharon](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-S-59A1F4.png?size=50x50)
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
![Frisco's Cards](https://cdn-fastly.hometalk.com/media/profile/2017/01/27/18563525_1.jpg?size=50x50)
How do I fix squeaky hardwood floors?
How do I remove fuzz from sweatshirts?
![ANGIE WILLIAMSON](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-A-50E3C2.png?size=50x50)
I have several sweaters & sweatshirts that have fuzz ball so bad that I cant wear them...a razor is way to time consuming...any ideas?
Try a bit of acetone fingernail polish remover on a cotton ball. Wipe clean with a damp cottonball moistened with water. Hopefully you only have a tiny bit on your countertop!
I used a razor blade to remove the dried glue. Hold the blade so the angle of the blade to counter is very low and scrape slowly and carefully. I used it on laminate and quartz counters.
Use both the above methods, but the razor blade first. Acetone can melt plastic, so be careful on the laminate.
I believe there is a super glue remover out there. You can check to be sure it's safe to use on laminate before you buy it.
I agree with using a razor blade carefully at an angle.