For Bonnie French /whitewashing stone questions?
Bonnie you commented on a 2018 post regarding whitewashing stone fireplaces. You said you have done this a lot, inside and out. You said you use - 5 to 1 water paint ratio. Flat? Do you always use white? Do you just spray on a coat with the industrial spray bottle you mentioned and leave it to basically soak in / dry? Or do you wipe it after spraying? Or perhaps brush it in after spraying ? I hope to connect. And if there are others with further suggestions- please share. I have brought this up before with the Hometalk forum. Bonnie suggested a method I hadn't heard yet. I like the idea of 5 to 1 ratio as I honestly don't want it to look overly painted. And we will probably use a flat gray.... looking forward to more suggestions! Thank you!
Related Discussions
How do I update those old brown slidings doors to the closets?
Update these old shabby ugly sliding closet doors?
How do I update my ugly mobile home closet doors?
They are completely function
How to makeover an ugly metal entrance door?
My entrance door is metal with a small openable window, how to update or make it look nice?
How do we remove calcium deposits on our patio water fountain
How do we remove calcium deposits from our patio fountain and brick walkway?
How do I remove hard water deposits from stainless washing machine tub
My new home's washing machine appears to have a rough buildup near the top of the stainless tub. I have run Affresh through the unit but this remains. I don't want to... See more
Would you rather wash and fold laundry or clean the dishes?
Given the choice, would you prefer washing the dishes or doing laundry? Share your preferences and insights!
How can I remove a magnetic door knocker from a metal door?
The magnet in the knocker has "welded" to the door and seems impossible to remove. I have to paint the door so if the paint is damaged its not a problem.
I think you need to go to original post and ask your question, so she will see it.
D, I recommend that you look at using masonry stain rather than watered down paint for this effect.
I tried to find the post by Bonnie French for you D but I was unsuccessful. Here's some tips that may help you. I would use a brush to apply the white wash and a rag to wipe it off once applied to control how much whitewash effect you'd like to see. You don't have to use just white paint--any color you'd like would be ok. Gray would be pretty.
https://www.coffeewithsummer.com/home-decor/whitewash-stone-fireplace
https://www.hometalk.com/diy/living-room/fireplaces-mantels/white-washed-fireplace-5601992
White Washed Fireplace