For Bonnie French /whitewashing stone questions?
Bonnie you commented on a 2018 post regarding whitewashing stone fireplaces. You said you have done this a lot, inside and out. You said you use - 5 to 1 water paint ratio. Flat? Do you always use white? Do you just spray on a coat with the industrial spray bottle you mentioned and leave it to basically soak in / dry? Or do you wipe it after spraying? Or perhaps brush it in after spraying ? I hope to connect. And if there are others with further suggestions- please share. I have brought this up before with the Hometalk forum. Bonnie suggested a method I hadn't heard yet. I like the idea of 5 to 1 ratio as I honestly don't want it to look overly painted. And we will probably use a flat gray.... looking forward to more suggestions! Thank you!
Related Discussions
What could be causing a wet floor, if a plumber finds no leaks?
wet floor under sink dry iu and run water no leak? no smell all is clean. run water both tubs, garbage disposal, use sprayer everything underneath stays dry. Go away ... See more
How can I turn this old doll house into a book shelf?
What can I use to stop flies from collecting on my new deck?
My deck is new , I was told flies are attracted to the sap of the wood,.
How do I remove paint from painted tile and tub?
How should I remove paint from a tile floor and a bathtub?
How do I take off hard water from my tub?
Here’s my issue I have been living in the same apartment building for 18 years and I have a tub that deals with hard water on a daily basis. What is the best way fo... See more
How do I keep my shower curtain from getting red water stains?
What front door paint color would you avoid?
Let's have a little fun with front door colors! We all have our preferences when it comes to home decor, and that includes the color of our front door.But today, I wa... See more
I think you need to go to original post and ask your question, so she will see it.
D, I recommend that you look at using masonry stain rather than watered down paint for this effect.
I tried to find the post by Bonnie French for you D but I was unsuccessful. Here's some tips that may help you. I would use a brush to apply the white wash and a rag to wipe it off once applied to control how much whitewash effect you'd like to see. You don't have to use just white paint--any color you'd like would be ok. Gray would be pretty.
https://www.coffeewithsummer.com/home-decor/whitewash-stone-fireplace
https://www.hometalk.com/diy/living-room/fireplaces-mantels/white-washed-fireplace-5601992
White Washed Fireplace