What kind of adhesive will work on sequins and contact paper?
what kind of adhesive to use for sequins to slick top of vinyl contact paper.i have a pattern custom print made of vinyl contact paper. I want to embellish with sequins I want clear. After the project is finished I will be placing a clear glass on top.the item is a round coffee table. The print is a large black & white peacock printed on vinyl. I want to fill in the colors of the peacock with sequins. Then place glass on top.the print is 42” diameter. Thanking in advance. Ruth
Related Discussions
Blackout curtains behind vertical blinds
I have two 6' patio doors, and I want to add blackout curtains to keep the sun/cold out. What is the best way to hang them, and what can I use to push the curtains ba... See more
How to make a balloon garland?
Does anyone know how to make a balloon garland or a balloon arch?
How do I open this tube?
The end of this tube is very hard. I slightly tried to punch the end of a knife into it and also tried a large paper clip but neither budged it. I was a bit timid in ... See more
Do all sewing machines have a presser foot tension regulator?
I am a mid to intermediate level seamstress. I've had two machines over the past 40 years, a Kenmore, followed by a White sewing machine, both very nice sewing machi... See more
How can I stiffen crepe paper?
HelloIs there anyway I can stiffen crepe paper leaves?
What type of saw and blade's do i need to slice/ cut agates?o
How do you glue the plastic that water bottles are made of ?
What kind of glue works with polyethylene plastic ? I have tried many kinds with no success.
You can use a tiny bit of low temp hot glue to secure the sequins to the vinyl. Do not use high temp hot glue. Another option would be Clear Gorilla Glue. I would try out each of these methods on a spare piece of the vinyl contact paper to see which works best for you before you begin your project.
You could also buy Super Glue or Gorilla Glue that comes with a brush attached to the lid and put a small dab of it on the sequins.
Thx I will do tests
Super glue would be the best. Also use some cork buttons or glob of hot glue on the corners of the glass. You don't want it to lay directly on top.
I have used a fabric glue that was specifically for trims and jewels and it was a perfect consistency and compliment to a job that was a a tedious application. I hope this helps.