How can you build a beach wheelchair?
My husband likes to go to the beach but he is in need of a beach wheelchair. I have seen them made out of PVC piping and large inflatable wheels. He is 6 ft 1 in tall and weighs 156 lbs.
Related Discussions
Can you use fence panels to build a floating deck?
I was thinking we could use 8x6 fence panel or two for a floating deck, was just going to add extra supports.
Can I ask Home Depot to cut my wood?
I'm seriously considering making this twisty side table that I fell in love with here on Hometalk (By Chasing A Dream), but cutting the wood is a bit too ambitious fo... See more
What to do with our livingroom ceiling?
We took the old popcorn ceiling off in our livingroom and thought we could just paint it. We fixed some hairline cracks where the joint in the sheetrock are, primed a... See more
What type of hinges are used on the top of this folding table?
Does anyone know what type of hinges are attached to the top of this folding table? The legs fold in toward the back then the top folds down flat against the legs.
How would I be put on these wheels ?
I am planning on doing a mobile wood bench using 2x4. I have these wheels but have no clue to put them on
Here's one set of plans for you Linda!
https://www.instructables.com/id/Beach-Wheelchair
I understand. you would have to adjust this for your husband's size, but this is probably a good place to begin: https://www.instructables.com/id/Beach-Wheelchair/
I found this one for you, too : http://uncommonneeds.blogspot.com/2009/08/diy-beach-wheelchair.html
Hi Linda, here are some instructions for building a beach wheelchair. Hope you enjoy the beach. Beach Wheelchair : 7 Steps (with Pictures) - Instructables
www.instructables.com › outside › beach
Beach Wheelchair. Introduction: Beach Wheelchair. By bhagler1 Follow. Step 3: Cut the Pvc Pipe. My diagram has the measurements you need for the pipe you need to cut. Step 4: Dry Fit and Cut Axle. Put the parts together but DON'T USE GLUE. Step 5: Final Assembly of the Frame. Step 6: Seating. Step 7: Finishing Up.
This two part YouTube video should help you out:
https://www.youtube.com/watch?v=VbDX0MPq7Qw
https://www.youtube.com/watch?v=Y9YDfcKif6A