How to paint trim without sanding?
DOes anyone know how to paint trim without sanding? Should I use chalk paint?
Related Discussions
Should I paint or stain my oak kitchen cabinets?
I was wondering if you could help me with something -- I have an entirely oak kitchen. I know it's the rage now to paint or gel stain cabinets. I've been considering ... See more
How to paint a metal front door?
How do I paint my front door? It's metal.
How to paint grout?
How do I paint grout to change the color? The grout is in great shape, but the color - meh.
How to whitewash a brick fireplace?
What is the best method to whitewash bricks surrounding a fireplace?
I want to paint water based paint over oilbased paint without sanding?
I've bought Rock Grip Soft Velvet to paint 3 rooms and now I've noticed that it was previously painted with oil based paint. I don't have the energy to sanding the w... See more
How to paint a door without sanding down to bare wood?
My husband and I purchased old home. We are finding everything's been painted previously over the years with different colors of paint! Yikes!!
You shouldn't have to sand it unless there is a finish on it that would prevent the paint from adhering.
I wouldn't recommend chalk paint unless you like the shabby look on your trim.
You could prime it then paint it. Just make sure to remove any loose dirt or debris.
Make sure to use a high adhesion primer.
I've never sanded trim before painting, but every house that I have ever lived in was older. No glossy paint to be found. The paint stuck just fine. Especially if you're not changing the color.
I would just clean the trim well and let it dry. As long as you are using the same brand and color as well as the same sheen paint I think you will be fine.
If it’s peeling, then sand down the peeling spots. Otherwise, just re-paint it
Make sure you use the same type especially if you don't sand like enamel, flat or gloss. I'm definitely not an expert.
Sanding does even lightly gives better bonding. Going from stain to paint good sanding, kilts and then paint.
Clean with TSP and you should be fine.
If you are painting over raw wood you might want to prime first. If you are painting new baseboards that are not yet attached--consider using spray paint--or paint in a paint sprayer--goes much faster and no brush marks.
I'd wash them with mild soap and water to get the dust and dirt off. High gloss looks nice.
Sanding helps the paint to adhere, however, if it is too hard for you, you can buy a liquid sander that can be applied to create the same roughed-up surface to help the paint adhere. You can buy it at any home improvement store in the paint department.
I have done it both ways. I found that priming the baseboards before you paint works well.
If they have been painted prior, I would recommend sanding. If raw wood, no, you won't need to.