Asked on May 27, 2020

New unattached interior doors

Deb KBecky at Flipping the FlipKmdreamer
+11

Answered

I have new unattached interior doors that will eventually be painted white. I am looking for advice on if they need to be sanded before priming. I have seen everything. From not sanding, to sanding before priming to priming then sanding.


14 answers
  • Mogie
    on May 27, 2020

    Are they natural wood or have they already been primed?

  • Nan W.
    on May 28, 2020

    Brian: If they are rough and/or dirty, they need sanding.

  • If they are smooth, they shouldn't need sanding before priming. After you apply a coat of primer, run your hand over the doors to see if the grain 'raised up'. If so, sand with 220 grit sandpaper and give them another coat.

  • Brian
    on May 28, 2020

    Hello, thanks for the replies. Doors are smooth, natural wood. Delivered today wrapped in plastic.

  • Lindsay Aratari
    on May 28, 2020

    I would think you wouldn't need to sand before priming

  • Annie
    on May 28, 2020

    They shouldn't need to be sanded before painting. Once you have them unwrapped and can run your hand over them, you will know for sure.


    They look lovely, I love wood doors :)

  • FrugalFamilyTimes.com
    on May 28, 2020

    What are the new doors made of? Is the wood bare?

  • Kathy Gunter Law
    on May 28, 2020

    It depends on their condition but traditionally you do not need to sand first. They should have come ready to paint and don't even need priming. That's the way most new doors come. If you are hesitant, you can always clean with TSP and then you should be ready to paint. If they are bare wood, you will need to prime before painting.

  • Nancy
    on May 28, 2020

    how do i save a project

  • Brian
    on May 28, 2020

    Thanks everyone. Door are made of wood, smooth and bare, JELD-WEN. We will just prime then paint.

  • Simple Nature Decor
    on May 28, 2020

    I always sand my doors a little and then prime them and then paint. just to be extra safe,

  • Kmdreamer
    on Jun 1, 2020

    They shouldn’t need sanding just paint them might need 2 coats of pInt

  • Check with either the store you purchased them from or the manufacturer for the best guidelines. I personally would probably lightly sand with a 220 or higher grit then prime.

  • Deb K
    on Jun 7, 2020

    Hi Brian, if the new doors are white, they are primed and ready for paint.

Your comment...