Homex tough as tile

Hi Heidi, in my experience a little light sanding with fine grit sand paper and a reapplication might do the trick! But I would definitely check with makers of the product and see what they would recommend.

I would contact Homex and ask for their recommendations.

Did you use a foam roller? It would give a smooth texture. Regular rollers will leave a texture and some fuzz can come off them embed in the epoxy.

here is the info for homax I would go online or call them

https://www.homaxproducts.com/kitchen-bath/sink-tile-refinishing/tough-as-tile-one-part-finish-spray-on-kit-white-1?bvroute=Review%2F36651419

Please post a picture of your project. Thanks

You can sand the area and re apply. After a bit of time, it will be less noticeable because the finish will wear a bit.

Hello. Please call the manufacturer for technical assistance.

Many times and I’ve had contacted paint products customer service 1-800 numbers and I’ve gotten very good advice and remediation solutions. Sometimes they have provided me with replacement product.

I would call or email the company and ask what they recommend

Try using a microfiber cloth with some cleaning solution like simple

Hi Heidi, someone asked a similar question a while back on Hometalk. You might find all this conversation useful - https://www.hometalk.com/29983687/q-this-is-my-first-coat-of-homax-tough-as-tile-is-this-typical. Hope you come right