I am planning on mounting some small lights under the cabinets of my Crafting work area.
-
KMS Woodworks on Jul 27, 2011The best for low heat would be LED's...to keep these in a more "color neutral" go for the Warm White variety...cool white will cast a blueish tint. In our "craft" area we also have a boom light that can be used for more intense detail work. Ours is halogen which can run hot but next time I need to get a bulb I'm going to switch to a "cree" LED that will fit the 2 prong halogen set up.Helpful Reply
-
-
WallsTreat Studio/ Kass Wilson on Jul 27, 2011There are special lights that are available at the craft stores that will give you true light. The surfaces that I work on are very large so I had to go with a halogen shop light. Avoid that if possible, they are hot and energy guzzlers.Helpful Reply
-
-
Paul R on Jul 28, 2011I agree, I have halogen lights under my cabinets and they get way too hot for my comfort. I only use them when I need them and I turn them off after. Partially for safety reasons.Helpful Reply
-
-
Strock Enterprises, Inc. on Jul 29, 2011I agree that LED lights are the way to go. One thing you'll want to look for is their "color range." A color range of 5000k will be a crisp white light while a 2700k will be more of a warm yellowish light. So, pick your color according to your task or use. I would probably recommend you purchase the 5000k to meet your needs of "true color." Now, as far as price, you will spend more for a 12" LED strip (probably about $75 - $100.) However, they're supposed to last essentially forever and use very little electricity and don't put off any heat. So, spend a couple dollars more and get what you want. Good luck and let us know how it works out for you. Sincerely, Trey StrockHelpful Reply
-
-
Barbara N on Jul 29, 2011You need a FULL SPECTRUM bulb... They are available at lighting stores and large home improvement stores...Helpful Reply
-
-
Pamala S on Jul 29, 2011Thanks for the pointers!!!!Helpful Reply
-
-
Pamala S on Aug 24, 2011Going shopping for the lights today. Very thankful to all of you for helping to make me feel more secure in what I will be looking for.Helpful Reply
-
-
KMS Woodworks on Aug 24, 2011Let us know what you findHelpful Reply
-
-
Pamala S on Aug 24, 2011http://www.arcadianlighting.com/mx-53704al.html this is one like i ended up with. OMGosh I wasn't expecting such a hefty price tag!!!Helpful Reply
-
Related Discussions
How do we remove calcium deposits on our patio water fountain
How do we remove calcium deposits from our patio fountain and brick walkway?
How do I remove hard water deposits from stainless washing machine tub
My new home's washing machine appears to have a rough buildup near the top of the stainless tub. I have run Affresh through the unit but this remains. I don't want to... See more
Would you rather wash and fold laundry or clean the dishes?
Given the choice, would you prefer washing the dishes or doing laundry? Share your preferences and insights!
How can I remove a magnetic door knocker from a metal door?
The magnet in the knocker has "welded" to the door and seems impossible to remove. I have to paint the door so if the paint is damaged its not a problem.
How do I get grass out of a phlox bed?
This flower bed is extremely dense with phlox. Last year, I pulled much of the grass out by the roots, but it came back with a vengence this year. We've had a ton of ... See more
Has anyone used a shower liner for curtain backing/liner?
I'm making new curtains in several rooms using cotton calico fabric. I'm trying to find an inexpensive -as possible lol- way to give a little more weight to them and ... See more