Any ideas for polishing a large brass candlestick - floor model other than brasso polish.
-
Dawn on Sep 06, 2012I recently cleaned the brass handles on my great grandmothers antique dresser and tried everything..Brasso..Tarnex...scrubbing with a stiff brush. Finally soaked them in CLR for a few minutes then scrubbed with steel wool and they look brand newHelpful Reply
-
-
Woodbridge Environmental Tiptophouse.com on Sep 07, 2012Chemicals used to polish brass, chrome, silver should be avoided if possible. The acid in these chemicals removes the oxidation to brighten up the metal, but also removes some of the plating in the process. The ideal method of fixing these candle sticks is to use a buffing bonnet on a drill or a bench grinder with the proper abrasive polish that comes in a stick form. The reason why your not really having any luck is that most likely the brass lamp has been coated with a clear coating to prevent it from tarnishing to quickly. But an abrasive buffing using fine polish compound will make it look really great once it is done. This job requires some time and effort. Do not expect it to be done in only an hour or two. Depending upon the coating and the drill speed or polisher speed, it may take several hours to complete. Once done and clean, spray a clear lacquer finish to preserve it for a long time.Helpful Reply
-
-
Donna C on Sep 07, 2012Soak in Hot vinegar!Helpful Reply
-
-
B. Enne on Oct 05, 2015salt on ½ lemon or a paste with baking soda and lemon juice http://www.apartmenttherapy.com/how-to-clean-brass-using-2-natural-kitchen-ingredients-141104Helpful Reply
-
Related Discussions
How can I get evergreen climbing vines that don't attract bees?
Need privacy screen I can train on trellises for my patio. There's lattice there, but not enough to block out neighboring home. This is a mobile home. Would love flow... See more
I am gluing some colored glass gems onto a glass window..
I am using E6000 to attach the glass gems to an old window. I want to make sure that everything will stay attached. I plan on spraying clear Krylon onto the whole gla... See more
How do I get the black marks off my composite deck?
As we all know New England is getting hammered with snow this year! And I had so much snow on the deck that I had to use the snowblower to get it off. I'm anticipatin... See more
How do I remove a rust stain from a wooden deck?
How do I remove a large, deep rust stain from a metal pan off my stained wooden deck?
How do I get grease stains off of composite decking material?
I have a bbq rug under the grill but I ended up getting some grease on the material anyway. Any idea?
How to remove Behr Deckover?
We used Bher Deck over about 5 years ago. It is peeling and fading in places. We have tried to remove it. It is almost impossible. HELP!
How do you remove an oil stain from composite decking?
I moved a snow blower to my composite porch for the up coming winter. After it was moved I noticed it had dripped engine oil on the deck and it soaked into the compos... See more