Any advice on polishing old marble?
-
KMS Woodworks on Dec 18, 2012I have a full set of wet only and wet or dry diamond polishing pads. These are about 4" in dia and have a velcro back they attach to a "driver" that screws onto my right angle grinder. The grinder is a bosch variable speed. These must be used with a variable speed tool. Many commercial polishing folk will use the wet pads with a pneumatic die grinder type rig...these run cool and can tolerate wet work. I use mine mostly for edge polishing granite and marble tile and have done a bit of "flat" work with them. The grit start around 50 and go to 3000 using 8 to 12 pads. http://www.ebay.com/itm/Diamond-Polishing-Pads-4-inch-Wet-Dry-11-Pce-Set-Granite-Marble-Concrete-Stone-/300702227609?_trksid=p3284.m263&_trkparms=algo%3DSIC%26its%3DI%26itu%3DUCI%252BIA%252BUA%252BFICS%252BUFI%26otn%3D21%26pmod%3D270642165535%26ps%3D54 It is a bit time consuming but works great.Helpful Reply
-
Related Discussions
Any advice on removing rust stains from a marble sink top?
Thanks!
Siding and insulation 100+ year old house - any advice?
I have an old house that has double wood walls. Wood on the inside, under the sheetrock, then 2x4 support studs and horizontal fire breaks, then wood siding on the ou... See more
How can I remove labels from coffee cans so I can upcycle them?
How can i keep neighbors small children from climbing my fence?
I have a 20 year old chain link fence set back on my property by almost a foot. The neighbors small children keep climbing it. I have talked to the dad and he doesn't... See more
How to get rid of bugs on raspberry bush without pesticide?
How can i upcycle rigid foam packing blocks?
how can i upcycle rigid foam packing blocks?
How do I get rid of moles, voles and chipmunks?
They dig holes, have tunnels and throw dirt all over. how can I get rid of chipmunks, voles, and moles with natural easy to find ingredients?