How can I recover a concrete bird bath that has become pitted/dirty?
by Jhc24085765
+4
7 answers
-
![Allison]()
Allison
on Jul 14, 2017
I used concrete patch that came in a little tub. I cannot recall the brand and couldn't find a link, but I did buy it at Home Depot. I just scrubbed the bath, let it dry in the sun, then used a putty knife to apply it. I used a damp rag to smooth it out, let it dry for a day. Viola! No leaky, ucky bird bath. -
![Dianacirce70]()
Dianacirce70
on Jul 14, 2017
Spray paint is an easy fix. Use a wire brush to get rid of any debris, you can hand paint and seal with a clear spray paint, or just go with spray paint. Rustoleum gives good results. -
![Janet Pizaro]()
Janet Pizaro
on Jul 14, 2017
http://homeguides.sfgate.com/resurface-cement-bird-bath-40931.html -
![Lori evans]()
Lori evans
on Jul 14, 2017
As a mosaic person I would see this as an opportunity. -
![Ebbjdl]()
Ebbjdl
on Jul 14, 2017
Put newspaper in bottom, and pour bleach, to cover at least 1/3 of bird bath. Let it sit until Sunshine is over it, and give it 3 hours remove paper dump liquid in a safe place, blast hose on it to rinse -
![Naomie Moore aka baileyanddaisey, Castaic CA]()
Naomie Moore aka baileyanddaisey, Castaic CA
on Jul 14, 2017
Just wash it out thoroughly with a natural bristle brush and some dawn dish soap. Rinse well, now you are back in business! -
![Cindy Thomas]()
Cindy Thomas
on Jul 14, 2017
http://homeguides.sfgate.com/resurface-cement-bird-bath-40931.html. You can buy stuff to resurface it. Or fill it with soil and plant a succulent garden
Allison
on Jul 14, 2017
Dianacirce70
on Jul 14, 2017
Janet Pizaro
on Jul 14, 2017
Lori evans
on Jul 14, 2017
Sign Up to Answer
Suggested Project Book
