Use a felt pen to mark the correct placement of the curtain rod holes based on the desired positioning of the curtains, then drill 3/8-inch holes through the fiberglass. Avoid drilling more than 1 inch into the door so the drill bit doesn't come through both sides of the door.
my daughter and I made an ornament wreath from pool noodles. When hung it sags so bad it becomes an oval. Any ideas how to add support now that it’s done??
I've seen the precious wreath made with rain boots but how do you keep the boots from just pulling everything off. If you attach to wire wreath form how do you hide ...
See more
Hi Tina, Here's a how to link that may help: https://www.hunker.com/13416850/how-to-mount-curtain-rods-on-fiberglass-doors
Good luck!
Hi Tina, here's another article that may help. https://homeguides.sfgate.com/attach-curtains-fiberglass-doors-101878.html
Use a felt pen to mark the correct placement of the curtain rod holes based on the desired positioning of the curtains, then drill 3/8-inch holes through the fiberglass. Avoid drilling more than 1 inch into the door so the drill bit doesn't come through both sides of the door.