Roll the opposite way let sit for a while(days maybe) unroll and if you have a sheet of plywood or paneling lay it on top and weigh down with books, weights,bricks whatever you might have with some weight.
I have two 6' patio doors, and I want to add blackout curtains to keep the sun/cold out. What is the best way to hang them, and what can I use to push the curtains ba...
See more
The end of this tube is very hard. I slightly tried to punch the end of a knife into it and also tried a large paper clip but neither budged it. I was a bit timid in ...
See more
I am a mid to intermediate level seamstress. I've had two machines over the past 40 years, a Kenmore, followed by a White sewing machine, both very nice sewing machi...
See more
https://gardening.stackexchange.com/questions/7135/how-to-flatten-chicken-wire?utm_medium=organic&utm_source=google_rich_qa&utm_campaign=google_rich_qa
Weight and roll the other way.
Roll the opposite way let sit for a while(days maybe) unroll and if you have a sheet of plywood or paneling lay it on top and weigh down with books, weights,bricks whatever you might have with some weight.
That's how I would do it.
Roll in the oposing directions. I would wear protective gloves handling any metal mesh or fencing.
At the beginning of this DIY Wire Flower project, she shows you how to cut chicken wire by placing wood planks on either side. Very clever!
Weight it down as you unroll, then re-roll it going the opposite way to help take out the tendency to roll.