How do I install faux shiplap in my bathroom?

Hi Elizabeth 1x6s would work fine to get the ship lap look. No, it won't actually "overlap" but if you put them side by side and also painted them white it will definitely give you the look you're going for.

Here is an easy way to get the shiplap look without all the trouble! It looks amazing too: https://thehoneycombhome.com/shiplap-accent-wall-the-easy-way/

Menards does stock ship lap that overlaps. Dakota is the brand name. You can also order it from Home Depot and have it shipped to your house. Arauco is the brand from Home Depot. I have used the Arauco--easy to install and looks nice.

Depending on your budget, you can use tongue and groove or get wood panels cut into strips. The wood panel option is much cheaper. You want flooring underlayment which cost about $15 for a 4 x 8 sheet. Ask them to cut it into long strips in the store. Every store has their minimum of how thin they will cut them. Try for 8", but 12" looks good too - a little more modern.

Here's better instructions. https://www.semiglossdesign.com/budget-friendly-shiplap

Go to craigslist and look for free pallets little more work but FREE!

Buy a privacy fence panel and tear it apart for about $30

Elizabeth,

Here is an excellent link on the best, cheapest, and fastest way to get your wall done!

Print out this article and keep it in your "file of project" for future reference.

We want to see photos when you are done!

https://www.tableandhearth.com/2015/09/easy-diy-shiplap-wall.html

Try Amazon or use wallpaper that looks just like shiplap, it’s even raised to look like real wood.

Elizabeth--I used the Arauco (Home Depot) ship lap on the ceiling in my bathroom and one wall behind the toilet. It has been fine. The ship lap is installed over my tub/shower unit. because it was only primed I did put 2 coats of paint on it. I have had no issues with moisture and we shower every day. It has only been up for 8 months. I also have it on one wall in my kitchen. No issues there either.