You need to start in one spot where you can get underneath an use a pry bar. Maybe take a circular saw with the blade set at depth of floor and cut out a section as a starting point. It is going to be a LOT of work. An alternative is to leave it in place and add a new floating floor over it.
We are trying to replace all the flooring on our main floor, and open up our kitchen. All the flooring has come out easily so far, except this parquet. It is glued do...
See more
Prying or use a motorized floor stripper...might be able to rent, not sure!
You need to start in one spot where you can get underneath an use a pry bar. Maybe take a circular saw with the blade set at depth of floor and cut out a section as a starting point. It is going to be a LOT of work. An alternative is to leave it in place and add a new floating floor over it.
Thanks Ken, this is exactly what I did but I stop after the first pass so I'll try to lay down the flooring over the existing floor