How to build a padded headboard

I need to build one for my double adjustable bed? No photo.
  4 answers
  • GrandmasHouseDIY GrandmasHouseDIY on Oct 12, 2015
    To build our headboard I bought a full size sheet of peg board (6x4 was what home depot carried), had it cut in half lengthwise and sand whiched it together so it was twice as strong and then 6x2. Then I just added two inch thick batting and wrapped it tightly in fabric and secured the fabric with staples on the back. We also added tufts by using the (very) convenient holes in the peg board using a large needle, thick thread, and big buttons we wrapped in the same fabric. From there I secured it to the wall above our bed with a french cleat.

  • Janet Pizaro Janet Pizaro on Oct 12, 2015
    I found this for you tefted headboard

  • Christie Christie on Oct 12, 2015
    GrandmasHouse thank you for the information. I also wanted to make a homemade headboard. Great information.

    • GrandmasHouseDIY GrandmasHouseDIY on Oct 13, 2015
      @Christie Eventually I'm going to post my headboard here on hometalk, but I didn't take pictures building it, hopefully shots of the back etc, will still give folks a good idea of how simple a project it is :)

  • Molly from Craft Weekly Molly from Craft Weekly on Nov 09, 2015
    Here is the one I made and how I made it...we love it! Hope this is helpful!