Smoothing out sheetrock repairs
-
KMS Woodworks on Jan 27, 2012Anna. I'm assuming this wall is not textured And is a basic smooth drywall finish? Raking light, light at an angle nearly parallel to the wall ( what you have now with your new windows) will show flaws very easily as you have pointed out. To make drywall look good in this light you will need to skim it again and feather the edges of the repair...the more distant this feathering is the better it will look. Flat paints also hide better than eggshell or semi-gloss. I have done some repairs in this context where the repair will fan out a foot or more. Poorly built walls can also show full floor to ceiling bumps. These are even harder to hide. The trick is to work with multiple thin coats and evaluate your progress as you go...sanding and skimming when dry to get all the imperfections out....then prime and paintHelpful Reply
-
-
Dan's of Central Florida, Inc. on Jan 27, 2012KMS has it right on here. You will need to reskim the areas. The goal is to make feather out the bump larger (as opposed to higher) so that it tricks the eye to a point where you no longer see it.Helpful Reply
-
-
3po3 on Jan 27, 2012DIY rookie drywall work can be really frustrating. I have had many walls where I worked all afternoon to make it perfect, only to see a glaring flaw the next morning. I would suggest hiring a pro to come touch this up. They shouldn't charge much for such a small job, and it would save you a lot of headaches.Helpful Reply
-
-
Woodbridge Environmental Tiptophouse.com on Jan 29, 2012This is exactly why new home builders use flat white paint on everything. Even those guys do lousy work. I just love when I did home inspections on new houses and shined my light against the wall. It showed up every little detail. You can take a electrical sander and lightly sand over the high spots. Your not trying to remove them but to break them down just a bit. Then with some spackle you will put another very thin coat over the area. You in effect are just going to "fill in" around the spot where you sanded. You should when your done end up with the spot showing just a bit with spackle surrounding it. There should be almost nothing there when your done. Then you need to wait for several hours for this to dry. Then do another coat of spackle but cover the spot in the center and go out a few more inches on all sides. Once again let dry then lightly sand using fine sandpaper. Then clean with damp rag and prime area. Use a flashlight and shine against wall to look for any imperfections. If need be, you can simply spackle over again. Once you get the hang of it, its not really hard. It just takes a few very thin coats to hide. Also the paint texture will also make these repairs stand out if your just spot painting. Once your done with all the dents and dings. Prime the entire wall area with a good quality primer using a slightly thicker nap roller. This will leave a bit of a texture although smooth on the wall. Then use your color coat with the roller that is needed for the paint your applying.Helpful Reply
-
-
A. M. on Jan 29, 2012Wow, thanks. That's about what I would have guessed I'd have to do. Can't wait to fix it once and for all.Helpful Reply
-
-
Dan's of Central Florida, Inc. on Jan 29, 2012Good luck Anna, let us know how it goes!Helpful Reply
-
-
Ernestine B on Feb 10, 2012I thank everyone for answering my question in such detail.Helpful Reply
-
Related Discussions
How can I remove labels from coffee cans so I can upcycle them?
How can i keep neighbors small children from climbing my fence?
I have a 20 year old chain link fence set back on my property by almost a foot. The neighbors small children keep climbing it. I have talked to the dad and he doesn't... See more
How to get rid of bugs on raspberry bush without pesticide?
How can i upcycle rigid foam packing blocks?
how can i upcycle rigid foam packing blocks?
How do I get rid of moles, voles and chipmunks?
They dig holes, have tunnels and throw dirt all over. how can I get rid of chipmunks, voles, and moles with natural easy to find ingredients?
How to remove Behr Deckover?
We used Bher Deck over about 5 years ago. It is peeling and fading in places. We have tried to remove it. It is almost impossible. HELP!
What are your thoughts on painted brick: yay or nay?
Painting bricks can completely transform the appearance of a home, giving it a fresh, modern look or adding a pop of color to an otherwise plain facade.On the other h... See more